Beko NCB 9760, Инструкция по эксплуатации

Страница: 10 / 52

en en en en
1 = Lowest cooling setting (Warmest setting)
5 = Highest cooling setting (Coldest setting)
(Or)
Min. = Lowest cooling setting
(Warmest setting)
Max. = Highest cooling setting
(Coldest setting)
The average temperature inside the fridge
should be 5°C.
Please choose the setting according to the
desired temperature.
Please note that there will be different
temperatures in the cooling area.
The coldest region is immediately above the
vegetable compartment.
The interior temperature also depends on
ambient temperature, the frequency with which
the door is opened and the amount of foods
kept inside.
Frequently opening the door causes the interior
temperature to rise.
For this reason, it is recommended to close
the door again as soon as possible after use.
Display Functions
Please see the figure Fig.2
1- Displays the actual temperature inside
the freezer compartment.
2-
Displays the set temperature inside the
freezer compartment.
3- Displays the actual temperature inside
the fresh food compartment.
4-
Becomes active when freezer
temperature is set to -18°C which means
economic usage.
5- Becomes active when eco-fuzzy function
is on.
6- Becomes active when focus-cool function
in on.
7- High Temperature Alarm: Activates
when the temperature values reach to high
values which will spoil your food.
If freezer-compartment temperature display
shows a message like E0, E1, ....,
you should contact the Authorised Service.
8- Becomes active when quick freeze
function is on.
9- Freezer Set Button: You can set the
freezer temperature by the help of this
button. Each time this button is pressed the
following numbers will be displayed by order
on the display, -18, -20, -22, -24. Displayed
values will be the freezer set temperature
for your appliance. Unit for these numbers
is °C.
10- Focus cool Button: This function is
designed for fast cooling of fresh food
compartment of your appliance. Push smart
function button to start the function, smart
lamb will be active on the display. When
hot food is placed inside the fresh food
compartment, smart function will
automatically activate. And smart lamb will
start flashing. As soon as the inside
temperature reaches desired values,
flashing will stop. And smart function will
Setting the operating
temperature
(Fig. 7)
The operating temperature is regulated by the
temperature control.
Prior to startup
Before you begin operating your device, the
following points should be re-checked for
safety:
• Is the device standing properly on the floor?
• Is there sufficient space for good air
circulation?
• Is the interior clean ? (Also see the section
“Cleaning and care”)
• Set the thermostat knob half way between
1 and 5 or Min. and Max.
• Now connect the device to the mains.
The compressor is turned on; the interior light
comes on when the door is opened.
Do not place foodstuff into the refrigerator until
the temperature has reached the desired level.
4
Warm Cold
1 2 3 4 5
(Or) Min. Max.