Beko MN13790PX, Руководство по эксплуатации

Страница: 9 / 28

6
Handling and placement
During handling, the door
side of the refrigerator shall
not contact with the
handling tools
Removing the foam base is
beneficial for bottom heat
dissipation and can avoid
fire.
The refrigerator shall be
placed in an environment
which is dry, has good
ventilation, far from direct
sunshine and heat source.
The refrigerator shall be
placed on the flat and firm
surface. If the ground is not
flat, adjust the adjusting leg
to keep it level. Never place the refrigerator
into a too cold environment
that may get frozen.
Certain space shall be left
around the refrigerator,
shown in the figure.
>30cm
>10cm >10cm
Caution:
When handling the refrigerator, at least two persons are required – one lifts the top of rear
part, the other one handles the bottom (if one part is clamped, it is quite heavy and may
cause accident).
--
When moving the refrigerator, the lower runner may damage and scratch the floor. If you
need to move the refrigerator for a long distance, the internal accessories shall be fixed
using adhesive tape. Otherwise, the accessories may get damaged due to crashing each
other.
--
Please place the refrigerator in the position with small vibration or little exposed to
vibration. For users in the area where earthquake often occurs, please fix the refrigerator
against the wall or pole. Otherwise, the falling of refrigerator will cause accident.
--
Sufficient clearance shall be left around. If the clearance is too small or goods on the top
or close to the side, or on the sides, the heat dissipation of refrigerator will be affected, and
thus to cause unnecessary electric energy waste as well as burn out of the wall
and other goods; the contact between the back and wall will cause vibration and noise;
--
Adjust the front part and adjusting leg of the refrigerator to level it. Unlevelling of the
refrigerator will cause vibration and noise.