Beko METPOINT BDL portable, Инструкция по установке и эксплуатации

Страница: 39 / 108

Operation BDL
METPOINT® BDL 39
14.2.2.1 Selection of the sensor type (Example: digital sensor type)
Main menu  Settings  Sensor settings  A1
Main menu

Settings

Sensor settings

A1

Text field type

Digital
Main menu  Settings  Sensor settings  A1  Text field diameter
Important:
The inner diameter should be entered as exactly as possible, since, otherwise, the measuring results
will be falsified!
No uniform standard exists for the inner diameter of the pipe!
(Please ask the manufacturer or, if possible, check the measurements yourself!)
If no sensor was configured yet, the,
Type no sensor will appear.
By pressing on the text field Type no sen-
sor , you will go to the selection list of the
sensor types (see next step).
Now, the Type Digital is selected for the
FS/DP series and confirmed by OK .
Important:
Here, the inner diameter of the flow pipe
can be entered in the event that it was not
automatically correctly set.