Cooker Hood / Instructions Booklet
9 / EN
speed settings.
• For a better performance, we advise you to
use low speeds in normal conditions, and high
speeds when smell and vapors are intensified.
• You can start the hood by pressing the desired
speed level key.(1,2,3 )
• You can illuminate the cooking area by pressing
the light key.(
)
3.4 Lamp Replacement
Disconnect the hood from the mains supply. This
appliance is equipped with 3 W spot LED lamps.
A
Before replacing the light bulbs,
disconnect the power supply of the
hood.
A
Do not touch the light bulbs when
they are hot.
A
Be careful not to touch the replaced
light bulb directly with hands.
C
You may procure lamps from
Authorised Service Agents.
3.1 Use of the Push Buttons
The hood is equipped with a mechanical control.
• Pressing the “0” - disables the hood.
• Pressing the “1” - to turn the hood with a
minimum speed.
• Pressing the “2” - turns the hood with an
average speed.
• Pressing the “3” - turns the hood at maximum
speed.
Higher speed means more air flow.
• Press the button
- to turn on the lights.
Repeat pressing the button to turn off the
lighting.
3.2 Things to Do for Energy
Saving
• Ensure sufficient air intake to make the hood
operate efficiently and with low operation noise
during cooking.
• Set the fan level according to the density of
steam in kitchen. Use the high level only when
needed. A lower fan level means less energy
consumption.
• If dense smoke is expected in the kitchen, select
a higher level of fan in advance. It is required to
operate the hood much longer to remove the
smoke already spread all over kitchen.
• Turn off the hood when not in use.
• Clean or replace the filter at intervals stated,
thus, the efficiency of the ventilation is
increased and the risk of fire is eliminated.
3.3 Operating the Hood
• Hood is equipped with a motor having various
1 2 3 0
Fig. 3
GU10
1
2
1
2
Symbol
Symbol
Bulb installation
Bulb dismantling
Fig. 4
Max:
3 W
3
Using the Appliance
