Beko GNE134750X, Руководство пользователя

Страница: 11 / 26

10 / 24 EN
Refrigerator / User Guide
Installation
4.
Attach the connector into the faucet adaptor
and tighten by hand / tool.
2.
Connect the other end of the water hose to
the water pump by pushing the hose into the
pump’s hose inlet.
5.
To avoid damaging, shifting or accidentally
disconnecting the hose, use the clips provided
to fix the water hose appropriately.
A
WARNING:
After turning the faucet
on, make sure there is no water leak on
either end of the water hose. In case of
leakage, turn the valve off and tighten
all connections using a pipe wrench or
pliers.
3.8. For products using water carboy
(Optional)
To use a carboy for the product’s water
connection, the water pump recommended by the
authorized service must be used.
1.
Connect one end of the water hose provided
with the pump to the product (see 3.6) and
follow the instructions below.
3.
Place and fasten the pump hose inside the
carboy.
4. Once the connection is established, plug in
and start the water pump.
C
Please wait 2-3 minutes after starting
the pump to achieve the desired
efficiency.
C
See also the pump’s user guide for
water connection.
C
When using carboy, water filter is not
required.