Beko GNE V122, Руководство пользователя

Страница: 20 / 95

EN
19
Icematic
* When the Icematic water supply
reservoir (1) is removed from its place
in order to fill it up, it must be replaced
within two minutes after it is filled with
water. The nozzle of the system will
open and the Icematic cells will be
filled with water automatically as soon
as the cartridge is seated in its place.
Your ice will be ready approximately in
two 2 hours.
• Do not remove the Icematic
(2) from
its seating to take ice.
• Turn the knobs on it clockwise as
illustrated in the figure.
Ice cubes in the cells will fall down in to
the ice bank (3) below.
• You may take out the ice bank and
serve the ice cubes.
• If you wish, you may keep the ice
cubes in the ice bank.
The ice bank is just for
accumulating ice cubes. Do not
put water in it. Otherwise, it will
break.
About water supply reservoir
Remove the water supply reservoir and
fill it up with water. After filled up with
water, the reservoir must be pushed
forward into its seating until a “click”
sound is heard. If there is any ice in
the reservoir, wait until it melts. Water
supply reservoir has a capacity of
approximately 290 ml.
2
3
Chiller compartment
If you wish to use the storage
container under the shelf as the Chiller
compartment, the storage container
under the shelf should be placed as
shown in the picture.
Chiller compartments enable the
foods to be frozen become ready
for freezing. You can also use these
compartments to store your food at a
temperature a few degrees below the
fridge compartment.
You can increase the inner volume of
your refrigerator by removing any of
the chiller compartments. To do this,
pull the compartment towards yourself;
the compartment will lean against the
stopper and stop. This compartment
will be released when you lift it about 1
cm and pull it towards yourself.