Beko FNE 1074, Руководство пользователя

Страница: 10 / 25

EN
9
3 Installation
distance between your freezer and
the wall in order to allow the air
circulation. (The illustrated figure is
only an example and does not match
exactly with your product.)
3.
Clean the interior of the freezer as
recommended in the “Maintenance
and cleaning” section.
4.
You will hear a noise as the
compressor starts up. The liquid and
gases sealed within the refrigeration
system may also give rise to noise,
even if the compressor is not
running and this is quite normal.
5.
Front edges of the freezer may feel
warm. This is normal. These areas
are designed to be warm to avoid
condensation
B
Please remember that the
manufacturer shall not be held
liable if the information given in the
instruction manual is not observed.
Points to be considered
when re-transporting your
freezer
1.
Your freezer must be emptied and
cleaned prior to any transportation.
2.
Shelves, accessories, crisper and etc.
in your freezer must be fastened
securely by adhesive tape against
any jolt before repackaging.
3.
Packaging must be tied with thick
tapes and strong ropes and the rules
of transportation printed on the
package must be followed.
Please do not forget…
Every recycled material is an
indispensable source for the nature
and for our national resources.
If you wish to contribute to recycling
the packaging materials, you can
get further information from the
environmental bodies or local
authorities.
Before operating your
freezer
Before starting to use your freezer
check the following:
1.
Is the interior of the freezer dry and
can the air circulate freely in the rear
of it?
2.
Please install the 2 plastic wedges
as illustrated in the figure. Plastic
wedges will provide the required
1
2
3
3
3
1