24
GB
on the display during the delayed start
countdown and the Time Delay Active
Indicator (
11
) will display the remaining
time. Programme will start automatically
when the countdown is over.
You can use the delayed start function
if you are utilizing the economic
electricity tariff.
If you want to change the programme
or functions while the delayed start
function is enabled, then pause the
machine by pressing the Start / Pause
/ Cancel button (
2
). You will see that
the countdown stops. The delayed start
indicator
will start flashing. Select
the new programme and/or add the
functions as described in
Programme
Selection and Table of Average
Consumption Values
. Resume the
delayed start countdown by pressing
the Start / Pause / Cancel button (
2
).
If you want to cancel delayed start
countdown while it is in progress,
then press the Start / Pause / Cancel
button (
2
) for three seconds. Release
the button when symbols (
12
) start
flashing in the display. For a couple
of minutes the machine will fulfill the
necessary operations required for
cancellation. Remaining time indicator
(
11
) displays “00:00”. You may select
and operate a new programme
following the delayed start countdown
cancellation process.
If you want to select a new delayed
start time while the delayed start
countdown is in progress, then pause
the machine by pressing the Start /
Pause / Cancel button (
2
). Set the
desired time by pressing the Time
Delay Button (
8
). Start the countdown
for the new time by pressing the Start /
Pause / Cancel button (
2
) again.
Usage of Child Lock
Press the Child Lock buttons (
4
) and
(
5
) simultaneously for three seconds
in order to activate the child lock. Child
lock indicator (
19
) will appear on the
screen. Repeat the same procedure to
disable the child lock. Child lock does
not lock the door of the machine but
it prevents the selected programme
or functions from being changed and
disables the Start / Pause / Cancel
button (
2
).
Salt Indicator
Please check the salt indicator (
18
)
on the display to see whether there is
enough softening salt in your machine
or not. You need to refill the powder
dispenser whenever the salt warning
indicator light lights.
WARNING:
If the water hardness level is stored
as (
r1
), salt indicator will never come
on even if the salt container is empty.
(Adjusting the water hardness level is
explained in Water Softening System
section.)
Rinse Aid Indicator
Check the rinse aid warning display
(
14
) on the screen to find out if there
is sufficient amount of rinse aid in your
machine. You must refill the rinse aid
container when the rinse aid indicator
comes on.
WARNING:
If the Rinse Aid Indicator is set to (OFF),
rinse aid indicator will never come on
even if the rinse aid container is empty.
Содержание DWD8667
Страница 1: ... Dishwasher DWD 8667 ...
Страница 34: ... ...
