Beko DVS Series Скачать руководство пользователя

Страница: 33 / 42

Dishwasher / User’s Manual

33 / 42 EN

Operation of the product

Cancelling the program

1. Press the Start / Pause / Cancel key for

3 seconds to cancel the program.

2. Release the key when Washing and

Drying indicators start to flash. The

water inside the machine shall be

drained within 45 seconds. Program

shall be cancelled when the Washing

and Drying indicators are turned off

and End indicator is illuminated. Then,

you may select a new program and

start it.

Detergent or rinse aid may remain

inside the machine and/or the dishes

being washed as per the step of the

program you have cancelled.

When the Program Selection Knob is

brought to “Off” position, the washing

program is ended and machine

becomes ready for selection of program

again. Water and detergent may remain

inside the machine if the washing is

ended in such a way.

Low Salt Warning indicator

Check the low salt warning indicator to

determine if the softening salt available in

your machine is adequate. You shall add salt

to the salt compartment when the low salt

warning indicator starts to illuminate.

Setting of water hardness level is

described in the Quick Guide.

Low Rinse Aid Warning

indicator

Check the low rinse aid warning indicator to

determine if the rinse aid available in your

machine is adequate. You shall add rinse

aid to the rinse aid compartment when the

low rinse aid warning indicator starts to

illuminate.

Setting the Rinse aid

Amount

1. While the Program Selection Knob is

“Off”, press and hold the Half Load/

Tablet function key of your machine

and rotate the Program Selection

Knob one step clockwise and keep the

function key pressed for 3 seconds.

Machine switches to rinse aid setting

mode.

2. When the rinse aid setting mode is

activated, the rinse aid level in the

memory is indicated by the program

monitoring LEDs for 5 seconds.

3. Bring the Program selection knob to

the proper position for the new rinse

aid amount setting.

4. Press the Start / Pause / Cancel key

once to record the selected setting in

the memory.

5. Machine returns to normal mode when

you bring the Program Selection knob

to “Off” position again.

Содержание DVS Series











































Результаты поиска

Содержание DVS Series

Отзывы:

Похожие инструкции для DVS Series

Бренды по названию

Популярные бренды

Beko DVS Series, Руководство пользователя

Результаты поиска

Содержание DVS Series

Отзывы:

Похожие инструкции для DVS Series

Бренды по названию

Популярные бренды