Beko DSS28121X Скачать руководство пользователя

Страница: 34 / 43

Dishwasher / User’s Manual

/41 EN

Operating the product

Overflowing warning

If the machine intakes too much water or

there is leakage at any of the components

then the machine will detect this and E:01

icon will flash on the Programme indicator.

As long as the overflowing continues safety

algorithm will be active and try to discharge

the water. If overflowing stops and safety is

assured, E:01 icon will disappear. If E:01 does

not disappear, there is a permanent fault. In

this case the authorised service should be

contacted.

No rinse aid dispensed in P:0 wash position.
1 dose of rinse aid is dispensed in P:1

position.

2 doses of rinse aid are dispensed in P:2

position.

3 doses of rinse aid are dispensed in P:3

position.

4 doses of rinse aid are dispensed in P:4
position.

End of programme

End of Programme indicator will light up

once the washing programme is over.

1. Press the On/Off button to turn off your

machine.

2. Close the tap.
3. Unplug the machine from the socket.

For energy saving, the product

is automatically turned off

following the completion of the

programme or if the programme

is not started.

Leave your dishes in the machine

for about 15 minutes to cool

down after they are washed.

Your dishes will dry in a shorter

time if you leave the door of your

machine ajar during this period.

This process will increase the

drying effectiveness of your

machine.

Water cut-off warning

If mains water is cut or water inlet tap is

turned off the machine cannot take water

in and E:02 icon will flash on the programme

indicator. As long as the problem continues,

washing programme is paused and the

water inlet is checked regularly by the

machine; when the water is restored E:02

icon will disappear after a while and the

washing programme resumes.

InnerClean

This programme is recommended to be

operated on each 1-2 months for machine

cleaning and necessary hygiene. The

programme should be operated while the

machine is empty.

In order to achieve an efficient result, it is

recommended to use together with special

machine cleaning agents.

Do not use this programme to

clean dishes. As it operates in

high temperatures, it is harmful

for the dishes.

Содержание DSS28121X












































Результаты поиска

Содержание DSS28121X

Отзывы:

Похожие инструкции для DSS28121X

Бренды по названию

Популярные бренды

Beko DSS28121X, Руководство пользователя

Результаты поиска

Содержание DSS28121X

Отзывы:

Похожие инструкции для DSS28121X

Бренды по названию

Популярные бренды