Beko DSN28420X Скачать руководство пользователя

Страница: 37 / 47

Dishwasher / User’s Manual

35 / 45 EN

Operating the product

For energy saving, the product

is automatically turned off

following the completion of the

programme or if the programme

is not started.

Leave your dishes in the

machine for about 15 minutes

to cool down after they are

washed. Your dishes will dry

in a shorter time if you leave

the door of your machine

ajar during this period. This

process will increase the drying

effectiveness of your machine.

Water cut-off warning

If mains water is cut or water inlet tap is

turned off the machine cannot take water

in and E:02 icon will flash on the programme

indicator. As long as the problem continues,

washing programme is paused and the

water inlet is checked regularly by the

machine; when the water is restored E:02

icon will disappear after a while and the

washing programme resumes.

Overflowing warning

If the machine intakes too much water or

there is leakage at any of the components

then the machine will detect this and E:01

icon will flash on the Programme indicator.

As long as the overflowing continues safety

algorithm will be active and try to discharge

the water. If overflowing stops and safety

is assured, E:01 icon will disappear. If E:01

does not disappear, there is a permanent

fault. In this case the authorised service

should be contacted.

Adjusting the amount of

rinse aid

1. After turning on the machine,

press Time Delay and P+ keys

simultaneously. Keep them pressed

until the countdown 3, 2, 1 is completed

on the display.

2. Press P+ to move to position P on the

display.

3. Set to the appropriate level with the

Time Delay key.

4. Turn off the machine with On/Off key

to save the changes.

No rinse aid dispensed in P:0 wash position.

1 dose of rinse aid is dispensed in P:1

position.

2 doses of rinse aid are dispensed in P:2

position.

3 doses of rinse aid are dispensed in P:3

position.

4 doses of rinse aid are dispensed in P:4

position.

Rinse Aid indicator ( )

Please check the rinse aid indicator on the

display to see whether there is adequate

amount of rinse aid in the dishwasher or

not. You need to refill the rinse aid reservoir

with rinse aid whenever rinse aid warning

indicator appears on the display of your

machine.

End of programme

End of Programme indicator will light up

once the washing programme is over.

1. Press the On/Off button to turn off

your machine.

2. Close the tap.
3. Unplug the machine from the socket.

Содержание DSN28420X
















































Результаты поиска

Содержание DSN28420X

Отзывы:

Похожие инструкции для DSN28420X

Бренды по названию

Популярные бренды

Beko DSN28420X, Руководство пользователя

Результаты поиска

Содержание DSN28420X

Отзывы:

Похожие инструкции для DSN28420X

Бренды по названию

Популярные бренды