Beko DSFN-6837, Инструкция по эксплуатации

Страница: 34 / 45

31
EN
“On/Off” button when the status is
“ON”, then the rinse aid indicator
will come on when the rinse aid
level in your machine becomes
low while the machine is in use.
If you switch off the machine with
“On/Off” button when the status is
“OFF”, then the rinse aid indicator
will never come on.
Starting Your Machine
•
Plug the mains plug into the wall
socket.
•
Open the tap.
•
Open the door.
•
Place the dishes.
•
Check if the upper and lower
impellers rotate freely.
•
Put sufficient amount of detergent
in the detergent dispenser and
close its lid.
•
Press On/Off button.
•
Check the rinse aid warning
indicator light and add rinse aid if
needed.
•
Determine your washing program
with the aid of the Program
Data and Table of Average
Consumption Values.
•
You can select the determined
washing program by pressing
program selection button.
•
You can see the program time in
the Remaining Time Indicator.
•
If necessary, you can change your
washing program as you prefer
by means of the Add Function
Buttons.
•
Start the program by pressing the
Start / Pause / Cancel button.
WARNING:
Pay attention not to open the door of
the machine when it is running. Stop
the machine by pressing Start / Pause
/ Cancel button if you have to open
the door. Then, open the door of your
machine. There may be a rush of
vapor when you open the door of your
machine; be careful. Close the door
and press Start/Pause/Cancel button
again. Program will resume running.
•
End of Program indicator will light
up.
•
Turn off your machine by pressing
On / Off button.
•
Close the tap.
•
Unplug the mains plug from the
wall socket.
•
Leave your dishes in the machine
for about 15 minutes after they
are washed in order to have them
cooled down. Your dishes will dry
in a shorter time if you leave the
door of your machine ajar during
this period.
This will increase
the drying effectiveness of your
machine.