QUICK REFERENCE GUIDE
EN
17 8771 01 00_AA
On / Off Key
When you press On / Off key, indicator lights illuminate on the
display for ON position. The lights turn off in OFF position.
Rinse aid level indicator light
If this indicator light comes on, you have to
refill rinse aid (If applicable).
You can also tell whether rinse aid must be
refilled by looking at the rinse aid dispenser.
When the visual fill indicator is dark, there is
enough rinse aid in the dispenser.
When the colour is light, open the dispenser
and refill rinse aid.
Programme Selection Key
Refer to "Table of Programme Data and Average Consumption
Values" to select a programme suitable for your dishes.
Select the desired programme with programme selection key.
Function “F” (Half Load / Tablet Detergent) Key
Half Load / Tablet Detergent Key allows you to turn on and off the
Half Load and Tablet Detergent functions of your machine.
Half Load Function
If you want to run your machine without loading it completely, place
your dishes into the machine as you desire. Press On / Off key to
turn on your machine. Press the Half Load / Tablet Detergent key
after selecting the desired programme until Half Load Indicator
lights up, then press Start / Pause / Cancel key and close the door
of your machine. With the Half Load option you can use every part
of your lower and upper baskets and you can save from both water
and power.
Tablet Detergent Function
Depending on the hardness level of the tap water, the Tablet
Detergent function allows obtaining a better drying performance
from the multi-purpose detergents such as 2in1, 3in1, 4in1, 5in1,
etc., called as all-in-one detergents. Tablet Detergent Indicator
lights when the Tablet Detergent function is selected.
Salt and Rinse Aid indicators turn off when this function is activated.
Turn on your machine by pressing the On / Off key to use the Tablet
Detergent function. Press the Half Load / Tablet Detergent key after
selecting the desired programme until Half Load Indicator lights up,
then press Start / Pause / Cancel key and close the door of your
machine.
To use the Half Load and Tablet Detergent functions concurrently,
turn on your machine by pressing the On / Off key and then press
the Half Load / Tablet Detergent key until Half Load and Tablet
Detergent Indicators illuminate together.
If you have used Half Load or Tablet Detergent features during
the last programme you used, Half Load or Tablet Detergent
function will remain active in the next washing programme you
will select. If you do not want to use these functions in the new
programme you have selected, press the Half Load / Tablet
Detergent key until the indicator of the relevant function turns
off.
“Inner Illumination” Setting
(If applicable)
You can use the submenu settings to change the “
Inner
Illumination
” setting you will use in your machine.
To change the submenu settings:
Turn on your machine by pressing the On/Off button while pressing
and holding Programme Selection and Start/Pause/Cancel keys.
Firstly,
P1
indicator will light up on the display. Select the desired
setting (
P1, P3
) by pressing the Programme Selection key.
P1
: Inner illumination (ON)
P3
: Inner illumination (OFF)
Save the selected setting by pressing Start/Pause/Cancel key
again.
Time Delay
Using the Time Delay key, you may delay the starting time of your
programme up to 3,6,9 hours with increments of 30 minutes. Press
Start / Pause / Cancel key after setting the Time Delay and close
the door of your machine. Once the time delay is over, the selected
programme will start automatically.
Start / Pause / Cancel Key
When you press the Start / Pause / Cancel key, the washing
programme you have selected will start.
(Start / Pause / Cancel indicator lights in Start mode, and turns off
in Pause mode)
To press the Start / Pause / Cancel key, wait for two seconds
after you turn on the machine by pressing the On / Off key.
LED progress indicator lights
The program sequence throughout the washing
process can be monitored from the progress
indicator lights on the control panel.
! Warning
Following the washing stage, in order to drain and remove water
from inside the machine completely, the machine will pause for
approximately 35 minutes. Do not worry this is not a fault. Then End
progress indicator light will come on.
! Warning
Do not switch the machine off before End light comes on.
Canceling a programme
To cancel the program selection while the machine is operating
open the door.
! Care must be taken when opening the door, as steam will escape.
Press and hold Start / Pause / Cancel key for 3 seconds. Release
the key as the Start / Pause / Cancel indicator starts flashing.
Once you close the door of your machine, draining is completed
in 2 minutes and the machine gives an audible warning when it is
completed.
There might be residues of detergent or rinse aid left in the
machine and / or on the pieces being washed depending on
the step the programme you have cancelled was in.
Visual Indicator
(If applicable)
Wash
Dry
End
