manualshive.com logo in svg

Beko DRYPOINT RA CT 100-NA-EB, Инструкция по установке и эксплуатации

Поделиться
Скачать
Beko DRYPOINT RA CT 100-NA-EB Скачать руководство пользователя страница 25

 

 

Installation 

DRYPOINT® RA CT 20-500 NA 

 

25 

9.5 Electrical 

connections 

 

 

Danger

! 

Supply voltage! 

The connection to the electric mains should only be carried out by qualified skilled personnel and must 
correspond to the legal provisions in force in your region.   

 

Prior to connecting the device, please check the type plate to avoid exceeding the indicated values. The voltage 
tolerance is +/- 10%.  
DRYPOINT RA CT 20-500 NA dryers are supplied with a power cord and safety plug (two-pole and earth connection). 
or with a junction box on the back plate. 
Make sure that suitable fuses or circuit breakers in accordance with the indications on the type plate are available. 
A residual-current device (RCD) with I

n =0.03A is suggested. The cross-section of the power supply cable must 

correspond to the power consumption of the dryer. In this respect, the ambient temperature, the cable laying 
conditions, the length of the cables and the requirements of the local electricity supplier need to be considered. 
 

 

 

Danger! 

Supply voltage and missing earth connection!

 

Important: ensure that the plant is connected to earth-ground. 
Do not use plug adapters at the power plug.  
Possible replacement of the power plug must only be carried out by a qualified electrician. 

9.6 Condensate 

drain 

 

 

Danger

! 

Compressed air and condensate under pressure! 

The condensate is discharged at system pressure. 
The drain pipe needs to be secured. 
Never direct the condensate drain pipe at persons. 
 

 

 
The dryer is delivered with an already integrated electronically level-controlled BEKOMAT condensate drain. Connect 
the condensate drain with a collection system or container by properly screwing it on. 
Do not connect the drain with pressurised plants. 
 

 

Do not discharge the condensate into the environment. 
The condensate accumulating in the dryer contains oil particles which were released into the air by the 
compressor. 
Dispose of the condensate in accordance with the local provisions. 
 
It is advisable to install a water-oil separator, to which the total amount of condensate from the 
compressors, dryers, tanks, filters etc. is supplied.  
We recommend ÖWAMAT oil-water separators for dispersed compressor condensate and BEKOSPLIT 
emulsion-splitting plants for emulsified condensate. 

 

Содержание DRYPOINT RA CT 100-NA-EB













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды