24 / EN
Dryer / User Manual
6.7 Auxiliary function
Cancel audio warning
Your dryer will give an audio warning when
the programme comes to an end. If you
do not want to hear the audio warning,
press “Cancel Audio Warning” button.
The relevant light will turn on when this
button is pressed and an audio warning
will not be given when the programme
comes to an end.
C
You can select this function
either before or after the
programme starts.
6.8 Warning indicators
C
Warning indicators may differ
according to the model of your
dryer.
Filter cleaning
A warning light will turn on to remind filter
cleaning after the programme finishes.
C
If the filter cleaning warning
light lights up continuously,
please refer to, “Suggested
solutions for problems”.
6.9 Time delay
If you wish to dry your clothes at a later time,
thanks to the time delay function, you can
delay the programme start up to 3 hours, 6
hours or 9 hours.
1. Open the loading door and put the
laundry in.
C
Make sure that all air outlets are
open, door filter is cleaned and
the water tank is empty.
2. Set the drying programme and, if
required, the auxiliary functions.
3. When the time programming button is
pressed once, a 3 hour delay is selected
and the relevant led lights. When the
same button is pressed again, 6 hours;
and if pressed once more, 9 hours delay
will be selected. If the time programming
button is pressed one more time, time
delaying function will be cancelled. Set
the time delay as you require.
4. Delayed operation of the selected
programme is started by pressing the
“Start/Pause/Cancel” button after
selecting the time delay.
C
Additional laundry may be loaded
/ taken out during the time delay
period.
C
During the time delay period,
laundry is rotated for 4 seconds
in every 10 minutes to prevent
creasing.
Canceling the time delay
If you want to cancel the time delay
countdown and start the programme:
1. Press “Start/Pause/Cancel” button for
about 3 seconds.
2. Press “Start/Pause/Cancel” button to
start the programme right away.
6.10 Starting the programme
1. Press “Start/Pause/Cancel” button to
start the programme.
2. Light of the “Start/Pause/Cancel”
button will turn on to indicate that the
programme has started.
6.11 Progress of programme
Progress of a running programme is shown
through the programme follow-up indicator.
At the beginning of every programme step,
the relevant indicator LED will light up and
light of the completed step will turn off.
“Drying”:
- Drying level will be illuminated during the
whole drying process until the drying degree
reaches “iron dry”.
“Iron Dry”:
- Starts to illuminate when the drying
degree reaches “iron dry” step and remains
illuminated until the next step.
“ Ready to Wear”:
Starts to illuminate when the drying degree
reaches “Ready to wear” step and remains
illuminated until the next step.
“Final / Anti-creasing”:
- Illuminates when the programme comes
to an end and anti-creasing function is
activated.