background image

Dishwasher / User’s Manual

35 / 45 EN

Operating the product

Rinse Aid indicator ( )

Please check the rinse aid indicator on the 

display to see whether there is adequate 

amount of rinse aid in the dishwasher or 

not. You need to refill the rinse aid reservoir 

with rinse aid whenever rinse aid indicator 

appears on the display of your machine.

Adjusting the amount of 

rinse aid

1.   After turning on the machine, 

press Time Delay and P+ keys 

simultaneously. After the countdown 

(3, 2, 1) is displayed keep the keys 

pressed for a while.

2.   Press P+ to move to position (P) on the 

display.

3.   Set to the appropriate level with the 

Time Delay key.

4.   Press On / Off key to save the setting.
No rinse aid dispensed in P:0 wash position.

1 dose of rinse aid is dispensed in P:1 

position.

2 doses of rinse aid are dispensed in P:2 

position.

3 doses of rinse aid are dispensed in P:3 

position.

4 doses of rinse aid are dispensed in P:4 

position.

End of Programme indicator will light up 

when the washing programme is over.

1.  Open the door of the machine.
2.  Press On/Off key to turn off your 

machine.

3.  Close the tap.
4.  Unplug the machine from the socket.

C

For energy saving, the machine 

is automatically turned off 

following the completion of the 

programme or if the programme 

is not started.

C

Leave your dishes in the 

machine for about 15 minutes 

to allow them cool down after 

they are washed. Your dishes 

will dry in a shorter time if you 

leave the door of your machine 

ajar during this period. This 

process will increase the drying 

effectiveness of your machine.

Water cut-off warning

If mains water is cut or water inlet tap is 

turned off the machine cannot take water 

in and E:02 icon will flash on the programme 

indicator. As long as the problem continues, 

washing programme is paused and the 

water inlet is checked regularly by the 

machine; when the water is restored E:02 

icon will disappear after a while and the 

washing programme resumes. 

Overflowing warning

If the machine intakes too much water or 

there is leakage at any of the components 

then the machine will detect this and E:01 

icon will flash on the Programme indicator. 

As long as the overflowing continues safety 

algorithm will be active and try to discharge 

End of programme

C

When the programme you have 

selected comes to an end, an 

audible warning signal will warn 

you to turn off your machine. 

This audible signal will warn you 

with certain intervals before it 

turns off.

Содержание DIT26420
















































Отзывы: