4
EN
Technical specifications
This product complies with the following EU directives:
Development, production and sales stages of this product comply
with the safety rules included in all pertaining European Community
regulations.
2006/95/EC, 2004/108/EC, 93/68/EEC, IEC 60436, EN 50242
Power input
220-240 V, 50 Hz
Total power consumption
1800-2100 W
Heater power
consumption
1800 W
Total current
(depends on the model)
10 A (see type plate)
Drain pump power
consumption
30 W
Water pressure
0.3 –10 bar (= 3 – 100 N/cm² = 0.03-1.0 Mpa)
Energy efficiency class
“A”
Electrical Safety class
“1”
C
Technical specifications may be changed without prior notice to improve
the quality of the product.
C
Figures in this manual are schematic and may not match the product
exactly.
C
Values stated on the product labels or in the documentation accompanying
it are obtained in laboratory conditions in accordance with the relevant
standards. Depending on operational and environmental conditions of the
product, these values may vary.
Note for test institutions:
Data required for performance tests shall be provided upon request. Requests
can be e-mailed to the following address:
Do not forget to provide the code, stock and serial numbers of the product to be
tested in your request e-mail along with your contact information. Code, stock
and serial numbers of the product is located on the type label attached to the
side of the door.
