Dishwasher / User’s Manual
13 / 43
EN
Preparation
Unpack the test
strip.
Open the tap and
let the water flow for
approx. 1 minute.
Dip in the test strip
into the water for 1
second.
Take out the strip
from the water and
shake it.
Wait for 1 minute.
Make the necessary
adjustment
according to the test
strip.
After detecting the water hardness:
1. After turning on your machine, press and hold the Delayed Start and Start/Pause/Cancel
keys respectively.
2. Using the Delayed Start key, turn on LEDs 9 and 3.
3. Use the function keys to adjust the water hardness level.
4. Press On / Off key to save the setting.
Water hardness level adjustment table
Hardness
Level
English Water
Hardness °dE
German Water
Hardness °dH
French* Water
Hardness °dF
Water Hardness Level Indicator
Level 0
0-5
0-4
0-8
On the 1
st
level, the 1
st
programme LED turns on.
Level 1
6-9
5-7
9-13
Level 2
10-15
8-12
14-22
On the 2
nd
level, the 2
nd
programme LED turns on.
Level 3
16-19
13-15
23-27
On the 3
rd
level, the 3
rd
programme LED turns on.
Level 4
20-24
16-19
28-34
On the 4
th
level, the 4
th
programme LED turns on.
Level 5
25-62
20-50
35-90
On the 5
th
level, the 1
st
, 2
nd
, 3
rd
and 4
th
programme LEDs
turn on.
If the hardness level of the water that you use is above 50°dH or if you are using well water,
than it is recommended to use filter and water purification devices.If the hardness level of
the water that you use is below 7°dH, there is no need to use salt in your dishwasher. In this
case, the Salt Indicator light on the control panel of your dishwasher will light continuously.
If the water hardness is set to level 1, the Salt Indicator will light continuously although it is
not necessary to use salt. If you use salt under this condition, salt will not be consumed and
the lamp will not illuminate.
