Beko DFS28022W страница 34 Скачать руководство пользователя

Страница: 34 / 43

Dishwasher / User’s Manual

/41 EN

Operating the product

Leave your dishes in the machine

for about 15 minutes to cool

down after they are washed.

Your dishes will dry in a shorter

time if you leave the door of your

machine ajar during this period.

This process will increase the

drying effectiveness of your

machine.

Water cut-off warning

If mains water is cut or water inlet tap is

turned off the machine cannot take water

in and E:02 icon will flash on the programme

indicator. As long as the problem continues,

washing programme is paused and the

water inlet is checked regularly by the

machine; when the water is restored E:02

icon will disappear after a while and the

washing programme resumes.

Overflowing warning

If the machine intakes too much water or

there is leakage at any of the components

then the machine will detect this and E:01

icon will flash on the Programme indicator.

As long as the overflowing continues safety

algorithm will be active and try to discharge

the water. If overflowing stops and safety is

assured, E:01 icon will disappear. If E:01 does

not disappear, there is a permanent fault. In

this case the authorised service should be

contacted.

Adjusting the amount of

rinse aid

1. After turning on the machine, press

Time Delay and P+ keys simultaneously.

Keep them pressed until the countdown

3, 2, 1 is completed on the display.

2. Press P+ to move to position P on the

display.

3. Set to the appropriate level with the

Time Delay key.

4. Press On / Off key to save the setting.
No rinse aid dispensed in P:0 wash position.
1 dose of rinse aid is dispensed in P:1

position.

2 doses of rinse aid are dispensed in P:2

position.

3 doses of rinse aid are dispensed in P:3

position.

4 doses of rinse aid are dispensed in P:4

position.

End of programme

End of Programme indicator will light up

once the washing programme is over.

1. Press the On/Off button to turn off your

machine.

2. Close the tap.
3. Unplug the machine from the socket.

For energy saving, the product

is automatically turned off

following the completion of the

programme or if the programme

is not started.

Содержание DFS28022W












































Результаты поиска

Содержание DFS28022W

Отзывы:

Похожие инструкции для DFS28022W

Бренды по названию

Популярные бренды

Beko DFS28022W, Руководство пользователя

Результаты поиска

Содержание DFS28022W

Отзывы:

Похожие инструкции для DFS28022W

Бренды по названию

Популярные бренды