Beko DFS26010B страница 32 Скачать руководство пользователя

Страница: 32 / 43

activated.

Child Lock prevents the selected

programme or functions from

being changed and disables the

Start / Pause / Cancel key.

Child Lock does not lock the door

of the machine.

If you turn your machine off by

using On/Off key at the end of the

programme, the Child Lock will be

deactivated automatically.

For energy saving, the product is

automatically turned off following

the completion of the programme

or if the programme is not started.

To deactivate the Child Lock:

1. Pres Child (Key) Lock keys

simultaneously and hold for 3

seconds.

2. "3", "2", "1" is displayed on Display

Information Line and key lock is

cancelled.

Cancelling the programme

1. Press Start/Pause/Cancel key for 3

seconds to cancel the programme.

2. Release the key when the Start

/ Pause indicator starts flashing.

For a couple of minutes the

machine will fulfill the necessary

operations required to cancel the

programme.

There might be residues of

detergent or rinse aid left in the

machine and / or on the pieces

being washed depending on the

step the programme you have

cancelled was in.

Salt indicator ( )

Please check the salt indicator on

the display to see whether there is

adequate amount of softening salt

in the dishwasher or not. You need

to refill the salt reservoir with salt

whenever salt warning indicator

appears on the display of your

machine.

Adjusting the water hardness

level is explained in Water

Softening System section.

Rinse Aid indicator ( )

Please check the rinse aid indicator

on the display to see whether there

is adequate amount of rinse aid in the

dishwasher or not. You need to refill

the rinse aid reservoir with rinse aid

whenever rinse aid warning indicator

appears on the display of your

machine.

End of programme

End of Programme indicator will light

up once the washing programme is

over.

1. Press the On/Off button to turn

off your machine.

2. Close the tap.
3. Unplug the machine from the

socket.

For energy saving, the product is

automatically turned off following

the completion of the programme

or if the programme is not started.

Leave your dishes in the machine

for about 15 minutes to cool down

after they are washed. Your dishes

will dry in a shorter time if you

leave the door of your machine

ajar during this period. This

process will increase the drying

effectiveness of your machine.

Water cut-off warning

If mains water is cut or water inlet

tap is turned off the machine cannot

take water in and E:02 icon will

flash on the programme indicator.

As long as the problem continues,

Содержание DFS26010B












































Результаты поиска

Содержание DFS26010B

Отзывы:

Похожие инструкции для DFS26010B

Бренды по названию

Популярные бренды

Beko DFS26010B, Инструкция по эксплуатации

Результаты поиска

Содержание DFS26010B

Отзывы:

Похожие инструкции для DFS26010B

Бренды по названию

Популярные бренды