Beko DFS05014X, Руководство пользователя

Страница: 31 / 40

Dishwasher / User’s Manual
29 / 38 EN
Operating the product
Salt indicator
Please check the salt indicator to see
whether there is adequate amount of
softening salt in the dishwasher or not.
You need to refill the salt reservoir with
salt whenever the no-salt warning symbol
lights.
C
Adjusting the water hardness
level is explained in Water
Softening System section.
Rinse Aid indicator
Please check the rinse aid indicator to see
whether there is adequate amount of rinse
aid in the dishwasher or not. You need to
refill the rinse aid dispenser with rinse aid
whenever the no rinse aid warning symbol
lights.
5. When you set the Programme Selection
Knob to the “Off” position again, the
machine will enter the normal mode.
Rinse Aid
Amount
Position of
program
selection
knob
Rinse Aid Adjustment
Indicator
1 dose of
rinse aid is
dispensed.
1
Washing lamp
on the panel will
illuminate.
2 doses of
rinse aid are
dispensed.
2
Drying lamp on
the panel will
illuminate.
3 doses of
rinse aid are
dispensed.
3
End lamp on
the panel will
illuminate.
4 doses of
rinse aid are
dispensed.
4
Washing, Drying
and End lamps
on the panel will
illuminate.
No rinse aid
dispensed
in washing
programme.
5
Washing, Drying
and End lamps
on the panel will
flash at 1-second
intervals.
Adjusting the amount of
rinse aid
1. While the Programme Selection Knob
is in “Off” position, press and hold the
function key and turn the Programme
Selection Knob clockwise by one level,
keeping the function key pressed for
2 seconds. At the end of this time,
the machine will enter the rinse aid
adjustment mode.
2. Once the machine has entered the
rinse aid adjustment mode, the stored
rinse aid level will be shown on the
programme follow-up LEDs for 5
seconds.
3. For the new Rinse Aid setting, set the
Programme Selection Knob to the
relevant position.
4. Press Start / Pause / Cancel key for
once to store the level you have
selected.
End of programme
End of Programme indicator will light up
once the washing programme is over.
1. Press On/Off/Programme Selection key
to switch off the product.
2. Close the tap.
3. Unplug the machine from the socket.
C
Leave your dishes in the
machine for about 15 minutes
after they are washed in order
to have them cooled. Your
dishes will dry in a shorter time
if you leave the door of your
machine ajar during this period.
This process will increase the
drying effectiveness of your
machine.