35
EN
2. Close the tap.
3. Unplug the machine from the
socket.
C
For energy saving, the product is
automatically turned off following
the completion of the programme
or if the programme is not started.
C
Leave your dishes in the machine
for about 15 minutes to cool down
after they are washed. Your dishes
will dry in a shorter time if you
leave the door of your machine
ajar during this period. This
process will increase the drying
effectiveness of your machine.
Water cut-off warning
If mains water is cut or water inlet
tap is turned off the machine cannot
take water in and E:02 icon will
flash on the programme indicator.
As long as the problem continues,
washing programme is paused and
the water inlet is checked regularly
by the machine; when the water is
restored E:02 icon will disappear after
a while and the washing programme
resumes.
Overflowing warning
If the machine intakes too much
water or there is leakage at any of the
components then the machine will
detect this and E:01 icon will flash
on the Programme indicator. As long
as the overflowing continues safety
algorithm will be active and try to
discharge the water. If overflowing
stops and safety is assured, E:01
icon will disappear. If E:01 does not
disappear, there is a permanent fault.
In this case the authorised service
should be contacted.
Содержание DFN28430X
Страница 1: ...Dishwasher Instruction Manual ...
Страница 47: ...15 0448 01 00_AA_ EN www beko com ...