Beko DFN2000X, Руководство пользователя

Страница: 24 / 35

21 GB
• Turn on your machine by pressing
the On/Off button to return to the
washing display.
NOTE: The key lock will not be
activated when the door is open and
programme cancellation will not be
possible.
Starting Your Machine
• Open the tap.
• Plug the mains plug into the wall
socket.
• Open the door.
• Press On/Off button.
• Check if the salt and rinse aid
indicators light and add salt and/
or rinse aid if needed.
• Place the dishes.
• Check if the upper and lower
impellers rotate freely.
• Put sufficient amount of
detergent in the detergent
dispenser and close its lid.
• Start the programme by pressing
Start/Pause/Cancel button.
WARNING:
Pay attention not to open the door of
the machine when it is running. Stop
the machine by pressing Start/Pause/
Cancel button if you have to open the
door. Then, open the door. There may
be a rush of vapor when you open
the door of your machine. Be careful.
Close the door and press Start/Pause/
Cancel button again. Programme will
resume running.
• Key lock will be activated 30
seconds after the programme
starts and ”Key Lock Activated”
will be displayed.
• Energy saving system will be
activated 90 seconds after the
programme starts and the display
is dimmed. If you touch the
button again, display brightness
returns to its original status.
• “End” will be displayed when the
programme is over. The amount
of water and energy consumed
will be displayed consecutively.
• Press the On/Off button to turn
off your machine when the
programme is over.
• Close the tap.
• Unplug the mains plug from the
wall socket.
• Leave your dishes in the machine
for about 15 minutes after they
are washed in order to have them
cooled down. Your dishes will dry
in a shorter time if you leave the
door of your machine ajar during
this period. This will increase
the drying effectiveness of
your machine.
Programme selection
You will be prompted to select ECO
or AUTO programme when you press
“Start / Pause / Cancel” button while
the “Press to wash” message is being
displayed.
When you see the “Press to wash”
message, press “Start / Pause /
Cancel” button. Messages that
countdown for AUTO programme will
be displayed:
Press for AUTO 5
Press for AUTO 4
Press for AUTO 3
Press for AUTO 2
Press for AUTO 1
If no process is done at the end of
the countdown, “ECO programme
selected” message will appear and
washing will start.