Beko DF8421TX0, Руководство пользователя

Страница: 18 / 27

Filter cleaning
At the end of the program, the indicator
When the Child Lock is activated: When the
dryer is working, or in standby mode, the
indicator lights do not change when you
change the position of the program selection
button.
filter cleaning warning light illuminates.
Water reservoir
If the water tank fills up while the program
is running, the warning indicator starts
flashing and the machine goes into standby
mode. In this case, empty the water tank
and restart the program by pressing the
Start/Standby button. The warning indicator
goes out and the
VS
REMARK
• When the dryer is running, the childproof
lock is activated. It beeps twice when
the program selection knob is turned.
If the Child Lock is deactivated without
returning the program selection knob
to its previous position, the program
will end due to the change in the
position of the program selection
knob.
program resumes.
Cleaning the heat exchanger located at the
bottom of the dryer
The warning light flashes periodically to
remind you to clean the filter located at the
bottom of the dryer.
5.7 Starting the program
Press the Start/Standby button to start the
program.
The Start/Standby and Drying indicators
light up to indicate that the program is
starting.
5.9 Modifying a running program
You can change the program selected for
drying your laundry and choose a different
program even if the dryer is running.
• For example, select the Extra Dry program
by turning the On/Off/Programme
selection button to select Extra Dry instead
of the Ready to Wear programme.
• Press the Start/Standby button to
5.8 Child lock
The dryer is fitted with a child safety device
which prevents any interruption of the
program cycle by locking the buttons when
a program is in progress. All buttons except
the On/Off/Program selection button are
disabled when Child Lock is activated.
Press the Dryness level and Alarm buttons
simultaneously for 3 seconds to activate the
child lock.
You must deactivate the Child Lock to be
able to start a new program at the end of
the current program or to interrupt the
current program. To deactivate Child Lock,
long press the same buttons for 3 seconds.
launch the program.
Adding or removing laundry in standby mode
If you want to add or remove laundry from
the tumble dryer after the drying program
has started:
• Press the Start/Standby button to switch
the dryer to Standby mode. The drying
process stops.
• When the appliance is in Standby, open
the loading door and close it after
adding or removing laundry.
• Press the Start/Standby button to start
the programme.
VS
REMARK
• When the Child Lock is activated, the
Child Lock warning indicator on the
screen lights up.
• The Child Lock deactivates when you
press the On/Off/Cancel button to
switch the dryer off and on.
18
Dryer / User Manual