Dishwasher / User’s Manual
13 / 45 EN
Preparation
Remove the test
strip from the
packet.
Turn on the tap and
let the water run for
about a minute.
Hold the test strip in
the water for about
a second.
Remove the test
strip from the water
and shake it.
Wait for 1 minute. The test strip shows
you the hardness
level.
After determining hardness level of the supply water:
1. After switching on your machine, long press the Menu key
2. Pres the settings menu key for 3 seconds to enter the Settings Menu.
3. Using <- and +> keys, proceed until the water hardness setting indicator becomes on (“r”
position will be displayed).
4. Using the Selection key, adjust water hardness level according to the hardness of the supply
water. For correct setting please see “Water hardness level setting table”.
5. Press the Menu key to exit the settings menu. Your setting will be saved automatically.
Water hardness level adjustment table
Hardness
Level
English Water
Hardness °dE
German Water
Hardness °dH
French Water
Hardness °dF Water Hardness Level Indicator
Level 0
0-5
0-4
0-8
Press the Selection key to switch the water
hardness level to position 1. (r1)
Level 1
6-9
5-7
9-13
Level 2
10-15
8-12
14-22
Press the Selection key to switch the water
hardness level to position 2. (r2)
Level 3
16-19
13-15
23-27
Press the Selection key to switch the water
hardness level to position 3. (r3)
Level 4
20-24
16-19
28-34
Press the Selection key to switch the water
hardness level to position 4. (r4)
Level 5
25-62
20-50
35-90
Press the Selection key to switch the water
hardness level to position 5. (r5)
In
order to protect your glassware against glass corrosion in an optimal way, you have to perform
the same hardness settings, which you have made in the control panel, with the regeneration
setting switch.
For example, if you have adjusted to “3rd level” in the control panel, also set the regeneration
adjustment switch to 3rd level.
Regeneration Adjustment Switch
0th Level 1st Level 2nd Level 3rd Level
4th Level 5th Level
1
1
2
3
4
5
