Beko DCY 8502 XB1, Руководство пользователя

Страница: 22 / 28

22 / 28 EN
Dryer / User Manual Dryer / User Manual
O perating the product
C
Child-proof Lock is deactivated when the
machine is switched off and on with On/
Off/Cancel button.
When the Child-proof Lock is activated:
Display symbols will not change even if the position of
Programme Selection knob is changed while the machine
is running or in halt.
5.13 Changing the programme after it has
started
After the machine starts, you can change the selected
programme and dry your laundry in a different pro-
gramme.
1. If you want to select Extra Dry programme instead
of Iron Dry programme, press and hold the Start /
Pause button to stop the programme.
2. Select Extra Dry programme by turning the
Programme Selection knob.
3. Press the Start/Pause button to start the program.
Adding / removing laundry in Pause mode
In order to add or take out laundry after the drying pro-
gramme has started:
1.Press
Start/Pause
button to switch the machine to
Pause mode. Drying process will stop.
2.While in
Pause
mode, open the loading door, add or
take out laundry and close the loading door.
3.Press the
Start/Pause
button to start the program.
C
Any laundry added after the drying
process has started may cause the
clothes that are already dried in the
machine intermingle with wet clothes and
the result will be wet laundry after the
drying process is over.
C
You may repeat laundry adding or
removing process as many times as
you desire during drying. However, this
process will increase the programme time
and energy consumption since the drying
process will be interrupted repeatedly.
Therefore, it is recommended to add
laundry before the drying programme has
started.
C
If you select a new programme by turning
the Programme Selection knob while
your machine is in Pause mode, then
the current program is aborted and new
programme information is displayed.
CAUTION: Do not touch the inner surface
of the drum when adding or taking out
laundry while a programme is running.
Surfaces of the drum are hot.
5.14 Canceling the programme
If you want to stop drying and cancel the programme for
any reason after the machine has started to run, press
and hold the On/Off/Cancel button for 3 seconds.
A
CAUTION:
As the inside of the machine
will be excessively hot when you cancel
the program while the machine is
running, activate the ventilation program
to cool it down.
5.15 End of programme
Lint Filter Cleaning and Water Tank warning symbols
light up in the programme follow-up indicator when the
programme comes to an end. The loading door can be
opened and the machine becomes ready for a second
cycle.
Press On/Off/Cancel button to switch off the machine.
C
If Anti-creasing function is activated and
the laundry is not taken from the machine
at the end of the programme, 2-hours
(depends on selection) Anti-creasing
programme is activated.
C
Clean the lint filter after each drying.
(See "Lint Filter and Loading Door Inner
Surface")
C
Drain the water tank after each drying
cycle. (See "Draining the water tank")