Beko D5, Руководство по обслуживанию

Страница: 30 / 38

- 30 -
F-AV : On when Front-AV is inserted, Off when not.
F-SVHS : On when F-SVHS connector is inserted, Off when not.
AV ST CURVE : Changes the linearity of volume increase/degrease
NTSC : On when NTSC playback is open, Off when not.
11.2.6. Factory Settings for Service Mode
1. Values given in Table 1 are typical values and can vary according to the CRT type.
2. PF means Pure Flat and SF means Super Flat.
3. The values in the table are decimal and shown in paranthesis on the OSD of TV.
14”
21" PF
AGC Automatic gain control 33 33
STD Stand by option OFF OFF
EEPE Reset the eeprom, all values lost 00 00
PEAK Peaking 32 32
SCRN Screen OFF OFF
GRN Green level 32 32
RED Red level 30 30
BLUE Blue level 30 30
BLOG Black level offset green 30 30
BLOR Black level offset red 36 36
YDLY Luminance delay 14 14
SAT Saturation 20 20
HUE Sharpness 32 32
CON Contrast 32 32
CDR Cathode Drive Level 02 02
BRI Brightness 32 32
EWT East West Trapezium 28 28
EWCU EW upper corner 32 32
EWCL EW lower corner 32 32
EWPW EW parabola width 17 17
HSHT Horizontal shift 32 32
EWW East West Width 60 60
VAMP Vertical amplitude 35 35
SCOR S correction 25 25
VSHT Vertical shift 28 28
VSLP Vertical slope 34 34
RGB OSD brightness level 01 01
PWLT Peak white limiting 09 09
IFOF Offset IF demodulator 32 32
HPAR Horizontal parallelogram 32 32
HBOW Horizontal bow 32 32
TEST Added for EMC purposes (=AGC-5) 35 35
EWP1 16/9 EW parabola width (for only 4/3 sets) 08 08
VOL Volume Level 50 50