Beko CWB 9503 X, Руководство пользователя

Страница: 8 / 16

8 / 13 EN
3 Installation Instructions
3.3 Fixing the decorative telescopic
flue
Arrange the electrical power supply within the di-
mensions of the decorative flue. If your appliance
is to be installed in the ducting version or in the
version with external motor, prepare the air exhaust
opening. Adjust the width of the support bracket of
the upper flue (Fig.3). Then fix it to the ceiling using
the screws A (Fig.3) in such a way that it is in line
with your hood and respecting the distance from the
ceiling indicated in Fig.2. Connect the flange C to
the air exhaust hole using a connection pipe (Fig.4).
Insert the upper flue into the lower flue. Fix the lower
flue to the hood using the screws B provided (Fig.4),
extract the upper flue up to the bracket and fix it
with the screws B (Fig.3). To transform the hood
from a ducting version into a filtering version, ask
your dealer for the charcoal filters and follow the
installation instructions.
3.4 Filtering version
Install the hood and the two flues as described in
the paragraph for installation of the hood in ducting
version. To assemble the filtering flue refer to the
instructions contained in the kit. If the kit is not pro-
vided, order it from your dealer as accessory. The
filters must be applied to the suction unit positioned
inside the hood. They must be centred by turning
them 90 degrees until the stop catch is tripped
(Fig.6).
Fig.6
Hood / User Manual