Beko CFD 7914, Инструкция по установке, эксплуатации и обслуживанию

Страница: 11 / 26

EN
10
REVERSING THE DOORS
1- Switch off the appliance at the
socket outlet and pull out the mains
plug.
2- Remove all loose items and
fittings and food, if any, from inside the
appliance and
door racks.
3- Unscrew the bolts and remove
the middle hinge while holding doors.
(1)
4- Remove the fridge door from
the top hinge. (2)
5-
Remove the freezer door. (3)
6-
Remove the plastic covers on
the front top trim. (4)
7 - Unscrew the bolts of the top
hinge and remove top hinge. (5)
8- Reposition plugs on the
opposite side. (6)
9- Remove the kick plate. (7)
10- Carefully tilt the appliance on
its back. (8)
(You may need somebody to
help you.)
11- Unscrew and remove the left
hand side front feet. (9)
12- Unscrew and remove the
bottom hinge. (10)
13- Remove the plastic cover and
fit the tap which is in the plastic bag to
the
other side.
(11)
14- Unscrew and remove the
middle hinge bushing from fridge door.
(12)
15- Screw and fix the new middle
hinge bushing which is supplied in
plastic bag to the
other side.
(13)
16- Reposition the hinge bushing
and the tap on the freezer door. (14)
17- Unscrew and reposition the
bottom hinge bushing. (15)
18- Unscrew bolt of the pin on the
bottom hinge. Fit the pin to the other
hole on the hinge and tighten the bolt
on the new position. (16)
19- Fit the bottom hinge and other
feet, and tighten the screws. (17)
20- Remove the plastic tap to the
opposite side on the front bottom trim.
(18)
21-
Fit the front bottom trim to the
bottom hinge and other feet. (19)
22- Rotate the top hinge 180°.
Unscrew the hinge pin and re-tighten it
to the
opposite side. (20)
23- Fit the top hinge and tighten
the bolts. (21)
24- Fit the plastic cover on the
front top trim. (22)
25- Locate the freezer door to the
bottom hinge and attach to the cabinet.
(23)
26- Locate the middle hinge on the
freezer door (24) and put the freezer
door
between the top and
middle hinge carefully. (25)
27-
Fit the middle hinge. Adjust the
doors and tighten the bolts. (26)
28- Fit the door handle to the
opposite side of the door and tighten
the bolts. (27)
29- Carefully stand your appliance
(you may need somebody to help you)
adjust the front feet.
30- Put back all, loose items and
fittings.
31- Wait for at least 4 hours to allow
the system to settle before switching
on.
32- Once the correct storage
temperatures have been reached in the
appliance, put back all the food.