Beko CDA38200, Инструкция по эксплуатации, Страница: 11 / 27

GB
Instruction for use
Operation
Before the first operation, clean the inside of
the appliance (read the chapter "Appliance
maintenance and cleaning").
After finishing this operation, plug the
appliance in. The green led will light.
The display of the refrigerator shows the real
temperature (from –5 to 19 degrees C / 23 to
66 degrees F).
The display of the freezer shows the real
temperature (from –30 to 30 degrees C / -22
to 86 degrees F). The appliance is endowed
with a protection device in the electronic side,
therefore the appliance will not start to
operate immediately – please wait approx. 6
minutes.
When it starts, you will hear the compressor.
You will also hear clicking / cracking noises,
but this is normal.
The set temperature will not be reached for
approx. 8 hours and the display can fluctuate
during this time. When the correct storage
temperature is reached, (after approx. 8
hours) you can start to put food inside.
The acoustic warning signal (red), for high
temperature in the refrigerator will be active
after 24 hours of operation.
When the door of the refrigerator is open, the
inside lamp will light. The front edges of the
appliance are so designed to avoid the
condense from occurring, and can be warm
when touching them.
The freezing of fresh food is possible after at
least 12 hours of operation.
Control panel operation
Item 11
The control panel adjusts the temperature in
the freezer, displays the temperature in the
refrigerator and has the following functions:
1 – Fast freeze button
2 – Freezer temperature set button
3 – Orange led – Fast freeze on
4 – Green led – electricity on (Voltage)
5 – Red Led – Alarm
6 – Refrigerator temperature set button
Temperature adjustment in the
refrigerator and freezer
The temperature adjustment of this combi can
be done separately. The operation
temperatures are controlled by the knobs of
the thermostats (2 –for the freezer and 6 – for
the refrigerator ).
The temperatures obtained inside can vary
according to the conditions of use of the
appliance: location, ambient temperature,
frequency of door opening, degree of loading
with food. The temperature setting will be
modified according to these conditions.
5