Beko BSS-2201 TT, Руководство пользователя

Страница: 9 / 12

9 / 11 EN
Water Dispenser / User Manual
3 Operation
7. Do not locate the dispenser in the area where
the temperature may fall below freezing point
(0°C- 32°F).
8. Keep area around dispenser free of dust and
dirt.
9. Keep the reserve supply of water bottles away
from excessive heat and light.
3.2 Operatıon
1. Ambient temperature: 10 ~ 43°
2. Atmosphere 86 ~ 106kpa
3. When using the bottles holding ultra-pure wa-
ter, distilled water or space water with the so-
called clever lid, tear off the hygienic label on
the lid, place the bottles at the intake, then the
core of water guard will automatically open
the valve and seal it in the meantime, when
moving the bottles, the valve will also seal au-
tomatically to avoid any possible oozing.
4. Push the hot water faucet, bubbles are gene-
rated inside the bottle, indicating that water is
flowing into hot water and cold water tanks,
keep pressing the hot water valve until wa-
ter flows out, dispensing cold water required
need no particular adjustment.
5. Do not connect the electrical power plug, until
water comes out of the hot water faucet.
6. After plug, the yellow LED indicator will be on
indicating the power is “ON”.
7. Turn on the heating switch, the red LED indi-
cator will be on and the heating system starts
working. When the hot water comes up to 85-
95° or so, the red light goes off, the heating
system stops working. The machine turns to
the warm-keeping status. When the hot wa-
ter temperature is lower than 85°,the heating
system will resume working automatically.
8. Turn on the cooling switch, the green LED indi-
cator will be on and the cooling system starts
working. When the cold water falls down to
6-10°, the green light goes off, the cooling
system stops working. The machine turns to
the cold-keeping status. When the cold water
temperature goes up to a set degree, the coo-
ling system will resume working automatically.
9. Since the temperature has already been ad-
justed before leaving the factory, it is unne-
cessary for customers to set the temperature.
10. Turn the heating and cooling switches on.
Then the heating and cooling processes start
working together.
11. If the device is not applied for a long time,
after the hot water cools down, please remo-
ve the power plug and revolve the drain cap
to drain the rest water in the hot tank then
tighten the cap. Open the cold water faucet to
drain the rest water in the cold tank.
12. If there is no water flowing from cooling fau-
cet, please shut down the cooling switch until
there is water flowing out.
13. If you do not plan to use the water hea-
ting function for more than three days, we
strongly recommend that you turn off the hot
water function.