12 / 22 EN
Refrigerator/User Manual
4
Preparation
t
For a freestanding appliance; ‘this
refrigerating appliance is not intended
to be used as a built-in appliance.
t
Your refrigerator should be installed at
least 30 cm away from heat sources
such as hobs, ovens, central heater
and stoves and at least 5 cm away
from electrical ovens and should not be
located under direct sunlight.
t
The ambient temperature of the room
where you install your refrigerator
should at least be 5°C. Operating your
refrigerator under cooler conditions is
not recommended with regard to its
efficiency.
t
Please make sure that the interior of
your refrigerator is cleaned thoroughly.
t
If two refrigerators are to be installed
side by side, there should be at least 2
cm distance between them.
t
When you operate your refrigerator
for the first time, please observe the
following instructions during the initial
six hours.
t
The door should not be opened
frequently.
t
It must be operated empty without any
food in it.
t
Do not unplug your refrigerator. If
a power failure occurs out of your
control, please see the warnings in
the “Recommended solutions for the
problems” section.
t
Original packaging and foam
materials should be kept for future
transportations or moving.
t
The baskets/drawers that are
provided with the chill compartment
must always be in use for low energy
consumption and for better storage
conditions.
t
Food contact with the temperature
sensor in the freezer compartment may
increase energy consumption of the
appliance. Thus any contact with the
sensor(s) must be avoided.
t
In some models, the instrument panel
automatically turns off 5 minutes
after the door has closed. It will be
reactivated when the door has opened
or pressed on any key.
t
Due to temperature change as a result
of opening/closing the product door
during operation, condensation on
the door/body shelves and the glass
containers is normal.
