Beko BRH60CX, Руководство пользователя, Страница: 19 / 20

Hood / User Manual
19 / EN
7
Solving problems
Symptoms Cause Repairing method
One or more light points do not
operate. Defective halogen/ LED bulb. The light bulb needs to be replaced
with a new, compatible with the symbol
specified in the instruction manual for
the cooker hood.
loosely fitted leaving clearance. vertically, tighten all mounting screws.
If the recommendations above do not solve the problem, contact an authorised service agent entitled to repair.
Under no circumstances is the hood user entitled to independent repair.
No symbol is shown on the display, the
hood does not respond to pressing the
control fields. The touch control is probably
suspended. Disconnect the hood from the power
supply for about 15 sec. and switch it on
again.
The hood has very poor vapor suction. Probably cause is dirty filters. The grease filter must be cleaned in the
dishwasher or replace with a new one.
The carbon filter (if present) must be
replaced with a new one.
The hood generated excessive noise
and vibration. This may be caused by an incorrect
installation of the hood to the wall
or kitchen cabinets. Not all provided
screws have been used or screws are The hood must be mounted to a wall or
cabinet by using all the points provided
for by the manufacturer. After adjusting
the position of the hood horizontally and