Cooker Hood / User Manual
9 / EN
3
Installation instructions
•
The exhaust air must not be discharged into a
flue which is used for exhausting fumes from
other appliances burning gas or other fuels. (Not
applicable for appliances which only discharge
air back into the room)
•
The minimum distance between the supporting
surface for the cooking vessels on the hob and
the lowest part of the range hood: When the
range hood is located above a gas appliance,
this distance shall be 65cm. If the instructions
for installation for the gas hob specify a greater
distance, this must be taken into account. (The
distance of 65cm can be reduced for non com-
bustible parts of range hoods and parts opera-
ting at safety extra low voltage provided these
parts do not give access to live parts. Distance
may be reduced to 60cm to align with the AGA
code.
•
Regulations concerning the discharge of air
have to be fulfilled
A
WARNING:
Failure to install the
screws or fixing device in accordan-
ce with the instructions may result in
electrical hazards
The cooker hoods should be placed at a distance
of 65-75cm from the cooking surface for best ef-
fect.
(See Pic 1)
65cm
75cm
(Pic 1)
Installation Instruction
(See Pic 2)
•
Cut a hole in the cupboard according to cut-out
size below for your model number. Make sure
it’s at least 35mm from the edge of the hole to
the cupboard edge.
•
Take down the filter and remove the four screws
on the panel.
•
Use random accessory tighten screws fix the
hood into cabinet.
•
Use 8 screws (ST4x14mm) fix the panel into
body and equip the filter.
•
Install one-way valve: put the one-way valve into
air outlet,
•
Put on the one-way valve with air outlet.
Pic 2
Pic 2
Pic 2
The size of the hole for BRH70UX
The size of the hole for BRH90UX
The size of the hole for BRH52UX
265 mm
265 mm
265 mm
490 mm
665 mm
865 mm
(Pic 2)