Beko BKS 9220 T, Руководство пользователя, Страница: 8 / 84

8 / 81 EN Vacuum cleaner / User manual
3 Operating your appliance
Intended use
The appliance was designed to be used in houses,
and is not fit for industrial use.
Press lock button to pull out the water container
(Figure 1) from the appliance by holding from
handle.
Press lock button
Handle
Figure 1
Remove the filter unit being held horizontally by
means of two snap-on buttons from the water
container (Figure 2).
Snap-on lock button
MAX
SU SEVIYESI
Figure 2
Fill the water container with normal tap water up
to the MAX level mark as shown in Figure 2.
Required water amount is 600 ml. Install the filter
unit back on the water container paying attention
to aligning it properly. Install the water container
on the appliance again.
Pull out the plug and cable at the back of the
product and plug it into the socket. Stop pulling
when the yellow mark on the supply cable comes
out, a red mark will come after the yellow mark;
never pull further than the red mark. Otherwise,
you may damage your product’s cable winder.
Attach the hose assembly supplied with your
product on to your vacuum cleaner. To start the
vacuum cleaner, first press the On/Off button.
(Figure 3).
Figure 3
To rewind the cable after vacuum cleaning process
is completed press the cable winding button on
your appliance. (Figure 4) Do not step on the cable
winding button. Mechanism may be damaged if it
is pressed forcefully by foot.
Figure 4
You may adjust the suction power of your product
while carrying out vacuum cleaning process by
means of the suction adjustment button located
on the body. (Figure 5).
Figure 5