Beko BKS 2422, Руководство пользователя

Страница: 5 / 15

5
Maintenance and Cleaning
When the dust indicator is red, stop your
vacuum cleaner and plug it off. Open the
spare paper filter lid (Picture 11-12). Take
out a paper filter and close the lid. Open
the dust lid (Picture 13).
Attention!
While fitting in the new paper filter, make
sure that the filter mouth is open (the
sliding filter lock is not pulled). For
maximum efficiency, use paper filters
tested and approved by Arçelik only.
Otherwise, as the dust holding capacity
of other paper filters that you will get
from the market is inadequate, failures
may occur in your appliance; in this case,
the defect will not be covered under the
guarantee conditions.
Textile Dust Bag:
If you are using a cloth dust bag, you
can empty and use the bag repeatedly.
If the dust bag in your appliance is made
of cloth, take out the cloth bag as
explained in the section titled “taking out
the paper bag”.
1) Removing the filthy and filled
paper filter:
Close the filter mouth by pulling the
sliding filter lock upwards. Remove the
paper filter by pulling it out from the filter
lock (Picture 14).
Fit the new paper filter into its place by
holding it from its end (Picture 15). Place
the back of the filter in its space (Picture
16).
(Picture 11) (Picture 12)
(Picture 13)
(Picture 14)
Spare
paper filters
(Picture 15) (Picture 16)
7
2) Cleaning the hepa filter:
In every five changes of the paper filter,
take the hepa filter casette by pressing
down the opening button, and take the
casette out. Wash the hepa filter in it to
clean (Pictures 17-18).
Attention!
Do not use the hepa filter before ensuring
that it is completely dry. Otherwise, the
motor of the vacuum cleaner may be
harmed.
After cleaning the hepa and drying it,
place it in its space, applying the reverse
procedure of taking it out (Pictures 19-
20).
3) Cleaning the engine protection
filter:
After every five uses of the paper filter,
take the motor protection filter casette
out from its socket (Picture 21); then
remove the motor protection filter, and
wash it to clean. When it is completely
dry, put it back to its place. Otherwise,
your motor may be harmed. Fit the
casette back to its place after placing
the filter in it (Pictures 22-23).
(Picture 17) (Picture 18)
(Picture 19) (Picture 20)
(Picture 21) (Picture 22)
(Picture 23)
5
Maintenance and Cleaning
8