EN
4
3
Using the Appliance
Chopping and Blending in the
Processor Container with the
Cutter Blade
• For your safety, your appliance
will not operate unless the
processor container cover is
seated well in its place.
To attach the motor body:
1. Align the position marks “
▼
” on the
body and “
” on the cover to place it
on the cover.
2. Rotate the motor body clockwise until
a locking sound is heard. In this case,
the “
▼
” position mark on the body
will align with the “ “ position mark on
the cover.
To detach the motor body:
1. Unplug the product.
2. Press and hold with one hand
the “
” locking button on the
cover and rotate the motor body
counterclockwise with the other hand
to the “ ” position mark. Remove the
motor body.
3. To detach the food processor’s
cover, press the buttons indicated by
arrows.
NEVER pull the locking tabs to
open them; always use the release
buttons.
Caution!
Read the “Maintenance and Cleaning”
part before using your product and
wash and dry carefully the detachable
and washable parts with lukewarm
soapy water. Never immerse the motor
part in water. You can wipe and clean
it with a slightly damped cloth.
When using your appliance, operate it
shortly (running intermittently in short
intervals) in “Turbo” position. Foods
you wish to chop or blend will blend
better and will be chopped to pieces
at the same sizes.
WARNING:
Your appliance is
designed to operate continuously for
maximum 10 seconds. Care should
be paid not to exceed this time when
preparing the foods. Otherwise, your
appliance may be damaged. Wait for
some 1 minute in every 10 seconds
until the appliance cools down.
BKK 2166_EN.indd 4
01.06.2011 10:17
