Beko BKK 2147, Руководство пользователя

Страница: 7 / 32

EN
5
1. Switch the appliance off, unplug
it from the wall socket and wait until
the strainer has come to a full stop.
2. Remove the dirty parts from the
motor unit and disassemble the
appliance in the following order:
- Pull the lever handle off the housing
section by pushing it downwards.
- Remove the dregs collector.
- Remove the pusher.
- Remove the transparent cover.
- Remove the strainer.
Clean these parts with water.
Clean the motor unit with a dry cloth.
Never immerse the motor unit into
water or rinse it with water.
1. Discoloration of the plastic
may occur because of fruits and
vegetables such as carrot, etc; this
is normal. To prevent this, wash the
stained parts immediately after use.
2. Do not use abrasive cleaning
agents, scourers, acetone,
alcohol etc. to clean the body and
accessories of the appliance.
- Put the properly prepared
(cleaned and sliced) fruits into the
food channel. Push the fruits slightly
by using the pusher. Do not push
the foods forcibly; otherwise, the
Juice extractor would not operate
efficiently or a dense flow may occur
in the liquid flow duct which will
cause the juice to spill around.
- Turn off the appliance by moving
the on/off switch to "0" position after
you are finished with juicing process.
- After being sure that the strainer
has come to a full stop, you may
remove and wash the parts.
Cleaning Method and Suggestions 4