21 / EN
Washing Machine / User’s Manual
• Child lock
Use Child Lock function to prevent children from tampering with the machine. Thus you can avoid any changes
in a running programme.
C
You can switch on and off the machine with On / Off button when the Child Lock is active. When you switch on the machine
again, programme will resume from where it has stopped.
When the Child Lock is enabled, an audio warning will be given if the buttons are pressed. Audio warning will be canceled if
the buttons are pressed five times consecutively.
To activate the Child Lock:
Press and hold Auxiliary Function button 3
for 3 seconds. After the countdown as
“3-2-1"
on the
display is over, child lock symbol appears on the display. When this warning is displayed, you can release the
Auxiliary Function button 3
.
To deactivate the Child Lock:
Press and hold Auxiliary Function button 3
for 3 seconds. After the countdown as
“3-2-1"
on the display
is over, child lock symbol disappears.
• Bluetooth 3’’
You can use the bluetooth connection function to pair your machine with your smart device. This way, you can use your smart
device to get information about your machine and control it.
To activate bluetooth connection:
Press and hold Remote Control function button
for 3 seconds. Countdown
“3-2-1”
will be displayed,
and then Bluetooth icon will appear on the display. Release
Remote Control function button
. The bluetooth
icon will flash while the product is pairing with smart device. If connection is successful, icon will remain on.
To deactivate bluetooth connection:
Press and hold Remote Control function button
for 3 seconds. Countdown
“3-2-1”
will be displayed,
and then Bluetooth icon will disappears on the display.
C
First setup of the HomeWhiz application must be complete for the bluetooth connection to be activated. After setup, pressing
the remote control function button while the knob is at Download Program/Remote Control position will automatically activate
the bluetooth connection.
4.3.9 End Time
Time display
Remaining time for the completion of the programme while it is running is displayed as “01:30” in hours and
minutes format.
C
Programme time may differ from the values in section "Programme and consumption table" depending on the water
pressure, water hardness and temperature, ambient temperature, amount and the type of laundry, auxiliary functions selected
and the changes at the mains voltage.
With the
End Time
function, the startup of the programme may be delayed up to 24 hours. After pressing
End
Time
button, the programme's estimated ending time is displayed. If the
End Time
is set,
End Time
indicator
is illuminated.
In order for the End Time function is activated and the programme is completed at the end of the specified
time, you must press
Start/Pause
button after adjusting the time.
