Beko BDUN Series Скачать руководство пользователя

Страница: 36 / 45

36/EN

discharge is completed within 2 minutes

and your machine will sound an audible

warning when it is completed.

Detergent or rinse aid may remain

inside the machine and/or the dishes

being washed as per the step of the

program you have cancelled.

Low Salt Warning indicator ( )

Check the low salt warning indicator on the

display to determine if the softening salt

available in your machine is adequate. You

shall add salt to the salt compartment when

the low salt warning indicator on the display

starts to illuminate.

Setting of water hardness level is

described in the Water Softening

System section.

Low Rinse Aid Warning indicator

( )

Check the low rinse aid warning indicator

on the display to determine if the rinse aid

available in your machine is adequate.

You shall add rinse aid to the rinse aid

compartment when the low rinse aid

warning indicator on the display starts to

illuminate.

Setting the Rinse aid Amount

1. When the door is closed, after

turning on your machine with the On/

Off button, enter the Sub-Menu by

pressing the On-Off and P2 program

buttons simultaneously for 3 seconds.

2. Go to "P" position on the display by

pressing the P2 button.

3. Set it to the appropriate

level by selecting one of the

“P:0”,“P:1”,“P:2”,“P:3” or “P:4” positions

with the P3 program button.

4. Exit the settings menu by pressing

the On/Off button for 3 seconds. Your

End of programme

For energy saving, the machine is

automatically turned off following the

completion of the programme or if the

programme is not started.

Leave your dishes in the machine for

about 15 minutes to allow them cool

down after they are washed. Your

dishes will dry in a shorter time if you

leave the door of your machine ajar

during this period. This process will

increase the drying effectiveness of

your machine.

Water supply is cut-off warning

If the mains water supply is cut off or the

machine water inlet tab is not opened,

water would not flow into the machine and

the E:02 icon will flash on the program

indicator. As long as the error continues,

the washing program is stopped and it is

checked whether the water flows or not

into the machine at certain intervals, when

water flows in, the E:02 icon turns off after

a certain period of time and the washing

cycle resumes.

settings will be saved automatically.

No rinse aid is applied in washing

program at P:0 position.

1 dose of rinse aid is applied at P:1

position.

2 dose of rinse aid is applied at P:2

position.

3 dose of rinse aid is applied at P:3

position.

4 dose of rinse aid is applied at P:4

position.

Содержание BDUN Series














































Результаты поиска

Содержание BDUN Series

Отзывы:

Похожие инструкции для BDUN Series

Бренды по названию

Популярные бренды

Beko BDUN Series, Руководство пользователя

Результаты поиска

Содержание BDUN Series

Отзывы:

Похожие инструкции для BDUN Series

Бренды по названию

Популярные бренды