/
13 / 52 EN
Preparation
Detergent manufacturer’s recommendations
about the amount of liquid/gel detergent to
be used are as follows:
For lightly soiled dishes
20 ml
For moderately soiled dishes
25 ml
For heavily soiled dishes
30 ml
C
Some gel-type detergents may
not be suitable for automatic
dosing as they are highly
viscous. Apply this type of
detergents onto the inner
surface of the dishwasher’s
door or directly into the
dishwasher, paying attention
to the recommendations of the
detergent manufacturer.
Adding Liquid/Gel
Detergent and Rinse Aid
The Automatic Liquid/Gel Detergent Dosing
system is found on the door of your
dishwasher.
1
2
After fully opening the door of the
dishwasher, open the decorative cover as
shown with arrows 1 and
A
B
C
D
2. Open the cover shown with (A) in the
picture and add rinse aid. Open the cover
shown with (B), add liquid/gel detergent and
close the covers.
C
The indicator marked with (C) on
your machine informs you about
the liquid/gel detergent level in
the box.
C
The indicator marked with (D) on
your machine informs you about
the rinse aid level in the box.
C
Wipe clean any spilled rinse aid
outside the reservoir. Otherwise,
it will cause foaming in the next
washing cycle, reducing the
washing performance of the
product.
C
The rinse aid used in
dishwashers is a special product
that is recommended to increase
drying efficiency and prevent
water or lime stains on the
washed items. For this reason,
care must be paid to have rinse
aid in the rinse aid reservoir
and to use rinse aids produced
specially for dishwashers only.
Using the Automatic Liquid/Gel
Detergent Dosing System
In order to use the Automatic Liquid/Gel
Detergent Dosing function, select Automatic
Liquid/Gel Detergent Dosing function on the
control panel.
When the function is active, its indicator
comes lit and the system uses appropriate
amount of detergent and rinse aid in each
washing program.
