Beko BDEN38530FX страница 35 Скачать руководство пользователя

Страница: 35 / 51

35/EN

IonGuard function

(depends on the model)

IonGuard function is enabled at regular

intervals and prevents the formation of

bad odours due to putrefaction. If this

function is selected, it will be activated

while the product is turned off and the

IonGuard indicator on the panel will flash.

A ventilation noise can be heard, this

is normal. Until the function selection is

disabled, system is automatically activated

intermittently.

Changing Warning Sound Volume

1. After switching on your machine, press

the Menu key for 3 seconds.

In some models pressing the Menu

key only for once will allow you to enter

the Settings menu.

2. Press <- and +> keys to move to the

“S:” position on the display.

3. Each pressing on the Selection key will

change the warning sound volume as

"S:0" off, "S:1" medium and "S:2" high.

4 Switch off the machine with the On/Off

key to save the changes.

Interior Lighting

(depends on the model)

Some models have interior lighting to

illuminate the interior when the door is

opened.

1. After switching on your machine, press

the Settings Menu key for 3 seconds.

In some models pressing the Menu

key only for once will allow you to enter

the Settings menu.

2. Press <- and +> keys to move to the

“L:” position on the display. Select the

position you want with the Selection

key. Interior lighting is off in “L:0”

position and on in “L:1” position.

3. Switch off the machine with the On/Off

key to save the changes.

SelfDry

(Depends on the Model)

Thanks to the “SelfDry” feature on your

machine, the drying effectiveness of your

machine is improved and power is saved.

There are two options, namely “OFF” and

“ON”.

You may use sub-menu settings to change

“SelfDry” settings.

When you activate this function, the door

of your machine is opened automatically at

the end of the washing cycle.

SelfDry feature opens the door at

the end of the washing cycle thanks

to the “door opening shafts". This

process takes about 2 minutes. Do not

force to close the door if the power is

interrupted while the shafts are moving

out. Operation shall be completed

and shafts shall be retracted when the

power is restored.

SelfDry function may cause changes to

the cycle time.

Floor illumination

Warning to show that machine is in

washing phase

(depends on the model)

Your machine reflects a light to the floor

during the washing process. This light turns

off after the washing process is complete.

Floor illumination is activated

automatically when the washing

programme starts and remains lit until

the end of the programme.

Floor illumination cannot be cancelled

by the user.

Содержание BDEN38530FX




















































Результаты поиска

Содержание BDEN38530FX

Отзывы:

Похожие инструкции для BDEN38530FX

Бренды по названию

Популярные бренды

Beko BDEN38530FX, Руководство пользователя

Результаты поиска

Содержание BDEN38530FX

Отзывы:

Похожие инструкции для BDEN38530FX

Бренды по названию

Популярные бренды