Beko BCTI30410, Руководство пользователя

Страница: 20 / 44

20 / EN
Induction Hob / User Manual
7 What to do in case of a problem
The hob or the cooking zone doesn’t start-up:
•
The hob is badly connected on the electrical
network.
•
The protection fuse cut-off.
•
The looking function is activated.
•
The sensitive keys are covered of grease or
water.
•
An object is put on a key.
The control panel displays [ U ]:
•
There is no pan on the cooking zone.
•
The pan is not compatible with induction.
•
The bottom diameter of the pan is too small.
The control panel displays [ E ]:
•
The electronic system is defective.
•
Disconnect and replug the hob.
•
Call after sales
One or all cooking zone cut-off:
•
The safety system functioned.
•
You forgot to cut-off the cooking zone for a long
time.
•
One or more sensitive keys are covered.
•
The pan is empty and its bottom overheated.
•
The hob also has an automatic reduction of
Booster level and breaking Automatic overheat-
ing
Continuous ventilation after cutting off the
hob:
•
This is not a failure, the fan continuous to pro-
tect the electronic device.
•
The fan cooling stops automatically.
The automatic cooking system doesn’t start-
up:
•
The cooking zone is still hot [ H ].
•
The highest Booster level is set [ 9 ].
The control panel displays [ ]:
•
Refer to the chapter “Keep warm“.
The control panel displays [ II ]:
•
Refer to the chapter “Stop&Go“
The control panel displays [ ] or [ Er03 ] :
•
An object or liquid covers the control keys. The
symbol disappear as soon as the key is released
or cleaned.
The control panel displays [ E2 ] :
•
The hob is overheated, let it cool and then turn
it on again.
The control panel displays [ E8 ] :
•
The air inlet of the ventilator is obstructed, re-
lease it.
The control panel displays [ U400 ] :
•
The hob is not connected to the network. Check
the connection and reconnect the hob.
The control panel displays [ Er47 ] :
•
The hob is not connected to the network. Check
the connection and reconnect the hob.
If one of the symbols above persists, call the after
sales service.