background image

 

5/EN

 

maintenance, cleaning and 
repairing procedures. 

 

If the power connection cable for 
the product is damaged, it must 
be replaced by the manufacturer, 
its service agent or similarly 
qualified persons in order to avoid 
a hazard. 

 

The appliance must be installed 
so that it can be completely 
disconnected from the mains 
supply. The separation must be 
provided by a switch built into the 
fixed electrical installation, 
according to construction 
regulations. 

 

If the electrical supply is restricted, 
means of all-pole disconnection 
must be accessible and 
incorporated in the fixed wiring in 
accordance with the wiring rules. 

 

Any work on electrical equipment 
and systems should only be 
carried out by authorised and 
qualified persons. 

 

In case of any damage, switch off 
the product and disconnect it 
from the mains. To do this, turn 
off the fuse at home. 

 

Make sure that fuse rating is 
compatible with the product. 

Product safety 

 

WARNING: The appliance and its 
accessible parts become hot 
during use. Care should be taken 
to avoid touching heating 

elements. Children less than 8 
years of age shall be kept away 
unless continuously supervised. 

 

Never use the product when your 
judgment or coordination is 
impaired by the use of alcohol 
and/or drugs. 

 

Be careful when using alcoholic 
drinks in your dishes. Alcohol 
evaporates at high temperatures 
and may cause fire since it can 
ignite when it comes into contact 
with hot surfaces. 

 

Do not place any flammable 
materials close to the product as 
the sides may become hot during 
use. 

 

Keep all ventilation slots clear of 
obstructions. 

 

Do not use steam cleaners to 
clean the appliance as this may 
cause an electric shock. 

 

WARNING: Unattended cooking 
on a hob with fat or oil can be 
dangerous and may result in fire. 
NEVER try to extinguish a fire with 
water, but switch off the 
appliance and then cover flame 
e.g. with a lid or a fire blanket. 

 

CAUTION: The cooking process 
has to be supervised. A short 
term cooking process has to be 
supervised continuously. 

 

WARNING: Danger of fire: Do not 
store items on the cooking 
surfaces. 

Содержание BCT601IG
























Отзывы: