Beko BBIE22300XFP, Руководство пользователя

Страница: 33 / 48

EN / 33
General warnings
Hot surfaces cause burns!
Do not touch the product during
self-cleaning and keep children away
from the product. Wait at least 30
minutes before removing the
residue.
• Before using the pyrolysis function, re-
move all accessories, the telescopic shelf
and the side shelves (if any). If not re-
moved, the accessories and side wire
shelves will be damaged.
• If your product has a pyro proof accessory
(resistant to high temperature self-clean-
ing), you do not need to remove these ac-
cessories from the oven. Whether your ac-
cessories are pyro-proof or not is specified
in the accessories section. If not specified,
your accessories are not resistant to high
temperatures. It must be removed from
the oven before cleaning to avoid damage.
• Do not clean the door seal. The glass fiber
seal is very delicate and easily damaged. If
the door seal is damaged, replace it with a
new one from an authorized service.
To start the pyrolysis function:
a. Remove all accessories inside the oven.
In the models with wire shelves, remem-
ber to remove the wire shelf.
b. Before starting the cleaning, clean the
outer surfaces of the oven and the food
residues inside the oven with soapy cloth.
c. Select the “pyrolysis” (Pyrolysis) function.
ð The “ P2:00” flashes on the display.
If your appliance is equipped with
the Eco pyrolysis function, the
“Pro” message is displayed on the
display for 2 seconds first, and then
the
P2:00 message starts to flash.
If the “Pro” and then the “ECO”
messages are not shown on the dis-
play, your appliance is not equipped
with the Eco pyrolysis function.
d. Turn the temperature knob to the highest
"max" (maximum) temperature.
e. When the pyrolysis function starts,
“P2:00” lights up and starts counting
down. The pyrolysis time (2 hours) is
shown on the display. This time is un-
changeable.
f. When the oven reaches a certain temper-
ature after the pyrolysis process starts,
the symbol appears on the timer dis-
play and the oven door cannot be
opened. Do not force the handle to un-
lock the door until the cleaning process is
finished and the lock symbol disappears
from the display.
g. When the cleaning process is finished,
"End" appears on the display.
h. After "End" appears on the display, turn
the function and temperature knobs to 0
(off) position to end the process.
i. When the symbol disappears on the
display, remove the remaining deposits
with vinegar water.
j. Touch any key to stop the audible warn-
ing.
After the pyrolysis function is com-
pleted, the door lock will be active
until the oven cools to the appropri-
ate temperature. If you want to cook
at this time,
"H” will appear on the
display and cooking will not be pos-
sible.
Self cleaning function with high temper-
ature – Eco pyrolysis (It varies depend-
ing on the product model. It may not be
available on your product.)
ü
If your oven is not very dirty, we recom-
mend using the "Pyrolysis - economy
mode" function. "Pyrolysis - economy
mode" function takes less time than the
Pyrolysis" function. If the oven is very
dirty, the "Pyrolysis - economy mode"
function may not be sufficient. In this
case, clean it by the "Pyrolysis" function.
a. Remove all accessories inside the oven.
In the models with wire shelves, remem-
ber to remove the wire shelf.