Beko ATP5100I, Инструкция по эксплуатации

Страница: 11 / 108

10 / EN Air purifier/ Instruction Manual
5
Operating Instructions
5.1 İmportant notes
•
Carefully unpack your air purifier.
•
Select a firm level place where there are no
obstructions to the air inlet grill or air outlet.
•
Remove all PE bags from filters before use.
•
Do not point air outlet towards wall.
Power button
Touch the Power button, the machine will
start running under the default “Medium”
setting, and the indicator of “Medium” setting
will illuminate.
Fan speed button
There are 3 speed settings including Low,
Medium and High for selection. Touch the Fan
speed button to select your desired speed
setting.
Timer button
The timer allows you to run your air purifier
at your convenience, for up to 8 hours. With 3
settings including 2hr, 4hr and 8hr.
Ionizer rocker switch
This appliance has an independent Ionizer
rocker switch equipped at the bottom of body,
feature which, when turned on, releases neg-
ative ions into outgoing filtered air to help the
air purification process.
6
Controls Introduction
Fig.4
Ionizer rocker
switch
Air purifier/ Instruction Manual
11 / EN
7
To Operate Your Air Purifier
1. Connect the appliance with power source,
one “Bi” can be heard.
2. Touch the
Power button once, “Bi-Bi” can
be heard, the appliance starts to run under
under the default “Medium” setting, and its
corresponding indicator will illuminate. Touch
the “Power button” again if you want to turn
off the appliance.
3. And you can select your required speed set-
ting by following the operation described in
“CONTROLS INTRODUCTION” . After select,
the corresponding indicator of selected speed
setting will turn on.
4. After turn on the air purifier and select your
required speed setting, you can activate the
timer by following the operation as below:
Touch down Timer button on the control
panel, one beep “Bi” can be heard. There are
3 settings including 2H, 4H and 8H for selec-
tion. After select your required timing, the
indicator of selected timing will illuminate.
When the timer expires, the air purifier will
power off automatically and the indicator of
selected timing will extinguish.
C
NOTE:
Hold and Touch the “Pow-
er button” for 2 seconds if you
want to enter into the sleep
mode. To recover, hold and Touch
the “Power button” for 2 seconds
again.
C
NOTE:
The appliance is of mem-
ory function. When being turned
on again, the appliance will work
according to the speed setting
saved last time.
5. When the filter change indicator illumi-
nates in white, it is time to change the HEPA
filter. Please change the HEPA filter by follow-
ing the operation described in the section of
“CHANGE THE HEPA FILTER” .
Air purifier/ Instruction Manual 11 / 108 EN