10 / EN
Air purifier/ Instruction Manual
5
Operating Instructions
5.1 İmportant notes
•
Carefully unpack your air purifier.
•
Select a firm level place where there are no
obstructions to the air inlet grill or air outlet.
•
Remove all PE bags from filters before use.
•
Do not point air outlet towards wall.
Power button
Touch the Power button, the machine will
start running under the default “AUTO” set-
ting, and the indicator of “AUTO” setting will
illuminate.
Fan speed button
There are 4 speed settings including Low,
Medium, High and AUTO for selection. Touch
the
Fan speed button
to select your desired
speed setting.
Timer button
The timer allows you to run your air purifier
at your convenience, for up to 8 hours. With 3
settings including 2hr, 4hr and 8hr.
Dust sensor
This Air Purifier has a built-in smart
dust sen-
sor
which can detect the air quality of current
environment automatically, and the air qual-
ity can be shown by the air quality indicator
which can illuminate in blue, pink and red
when the air quality is very good, good and
bad accordingly.
6
Controls Introduction
Ionizer rocker switch
This appliance has an independent Ionizer
rocker switch equipped at the bottom of body,
feature which, when turned on, releases neg-
ative ions into outgoing filtered air to help the
air purification process.
Fig.4
Ionizer rocker
switch
Air purifier/ Instruction Manual
11 / EN
7
To Operate Your Air Purifier
1. Connect the appliance with power source,
one “Bi” can be heard.
2. Touch the
Power button
once, “Bi-Bi” can
be heard, the appliance starts to run under
under the default
“AUTO”
setting, its corre-
sponding indicator will illuminate, and the air
quality indicator will illuminate in blue, pink or
red according to the actual air quality.
-
Very good air quality:
The air quality indi-
cator illuminates in blue.
-
Good air quality:
The air quality indicator
illuminates in pink.
-
Bad air quality:
The air purifier illuminates
in red.
3. And you can select your required speed set-
ting by following the operation described in
“CONTROLS INTRODUCTION”
. After select,
the corresponding indicator of selected speed
setting will turn on.
4. After turn on the air purifier and select your
required speed setting, you can activate the
timer by following the operation as below:
Touch down
Timer
button on the control
panel, one beep “Bi” can be heard. There are
3 settings including 2H, 4H and 8H for selec-
tion. After select your required timing, the
indicator of selected timing will illuminate.
When the timer expires, the air purifier will
power off automatically and the indicator of
selected timing will extinguish.
5. When the filter change indicator illumi-
nates in white, it is time to change the HEPA
filter. Please change the HEPA filter by follow-
ing the operation described in the section of
“CHANGE THE HEPA FILTER”
.
C
NOTE:
Hold and Touch the
“Power
button”
for 2 seconds if you want
to enter into the sleep mode. To re-
cover, hold and Touch the
“Power
button”
for 2 seconds again.
Timer
Button
Air
Outlet
Fan Speed
Button
Power
Button
Filter change
indicator
Fig.5
Air purifier/ Instruction Manual
11 / 120 EN
Содержание ATP 6100 I
Страница 1: ...01M 8895673200 4520 01 ATP 6100 I EN DE FR IT NL RO SRB TH VN Air Purifier Instruction Manual ...
Страница 81: ......
Страница 119: ......
Страница 120: ...www beko com ...
