22 /33 EN
Refrigerator / User Guide
Using the product
6.3 Deodoriser Module
(FreshGuard)
*May not be available in all models
The deodoriser module quickly eliminates the bad
smells in your refrigerator before they permeate the
surfaces. Thanks to this module, which is placed
on the ceiling of the fresh food compartment, the
bad odours dissolve while the air is actively being
passed on the odour filter, then the air that has been
cleaned by the filter is re-emitted to the fresh food
compartment. This way, the unwanted odours that may
emerge during the storage of foods in the refrigerator
are eliminated before they permeate the surfaces.
This is achieved thanks to the fan, LED and the odour
filter integrated into the module.
When you want to use the deodorizer module,
please activate it from the indicator button.
LED on the key blinks quickly (with the interval of
0.2 seconds). When the connection is active, the
LED shall light up continuously.
If the connection cannot be established for a long
period, check your connection settings and refer to
the “Troubleshooting” section provided in the user
manual.
HomeWhiz application shall be used for wireless
connection. Installation steps are described on the
application during installation.
You may access the application by reading the
QR code available on the HomeWhiz label on the
product. The App is offered through App Store for
IOS devices, and through Play Store for Android
devices.
Visit https://www.homewhiz.com/ for detailed
information.
11. Freezing Compartment Temperature
Setting Key
Temperature setting is made for cooler
compartment. Pressing this key (
) will enable
the freezer compartment temperature to be set at
-16, -17, -18, -19, -20, -21, -22 Celcius.
C
* Energy Saving (Display Off)
Mode
Energy saving function is enabled
automatically when the door of the
product is not opened and closed,
and all symbols other than the one
selected last amongst the water (
), ice cube ( ) and ice particles (
) symbols are turned off. When the
energy-saving function is active,
pressing any key or opening the door
will deactivate the energy-saving
function and the display signals will
return to normal. The energy-saving
function is a function activated ex-
factory and cannot be cancelled.