4 / 42 EN
Refrigerator / User Guide
Safety and environment instructions
Professional plumbers is you
are not sure that there is no
water hammer effect in your
installation.
•
Do not install on the hot water
inlet. Take precautions against
of the risk of freezing of the
hoses. Water temperature
operating interval shall be 33°F
(0.6°C) minimum and 100°F
(38°C) maximum.
•
Use drinking water only.
Electrical requirements
Before you insert the plug into
the wall socket make sure that
the voltage and the frequency
shown on the rating plate inside
the appliance corresponds to your
electricity supply.
Rating label is on the left hand
side of fridge inner liner.
We recommend that this
appliance be connected to the
mains supply via a suitable
switched and fused socket. The
appliance must be positioned so
that the plug is accessible.
Should the mains lead of the
appliance become damaged or
should it need Replacing at any
time, it must be replaced by a
special purpose made mains
lead which can only be obtained
from a
Beko
authorised service
agent.
Warning! This appliance must
be earthed
If the fitted moulded plug is not
suitable for your socket, then the
plug should be cut off and an
appropriate plug fitted. Destroy
the old plug which is cut off as a
plug with bared cord could cause
a shock hazard if inserted into a
socket elsewhere in the house.
The moulded plug on this
appliance incorporates a 13 A
fuse. Should the fuse need to be
replaced an ASTABEAB approved
BS 1362 fuse of the same rating
must be used. Do not forget to
refit the fuse cover. In the event
of losing the fuse cover the
plug must not be used until a
replacement fuse cover has been
fitted.
Colour of the replacement fuse
cover must be the same colour as
that visible on the pin face of the
plug. Fuse covers are available
from any good electrical store.
