Beko 7000840035, Руководство пользователя

Страница: 45 / 56

45 / EN
Washing Machine / User Manual
4.3.10.2 Functions/Programmes
Selected by Pressing the Function
Buttons for 3 Seconds
• Drum Clean
To select this programme, press and hold the
auxiliary function button 1 for 3 seconds.
Use it regularly (every 1-2 months) to clean
the drum and ensure the required hygiene is
provided. Run the programme while the machine
is totally empty. To obtain better results, put
powder lime-scale remover for washing machines
into the detergent compartment no. “2”. When
the programme is over, leave the loading door
ajar so that the inside of the machine gets dry.
C
INFORMATION
• This is not a washing programme. It is a
maintenance programme.
• Do not run this programme when there are
any objects in the machine. If you try to do
so, the machine will automatically detect that
there is load inside and abort the programme.
• Child Lock
You can prevent children from tampering with
the machine by using the Child Lock feature.
Thus you can avoid any changes in a running
programme.
C
INFORMATION
• If the Programme Selection knob is turned
when the Child Lock is enabled, "Con"
appears on the display. While the Child Lock
is enabled, you cannot make any change in
the programmes, the selected temperature,
the speed or the auxiliary functions.
• Even if another programme is selected with
the Programme Selection knob while the
Child Lock is enabled, previously selected
programme will continue running.
To enable Child Lock:
Press and hold the Auxiliary Function button 2
for 3 seconds. While you’re holding the button
pressed for 3 seconds, C03, C02 and C01
will be displayed respectively.Then, “Con” will
be displayed to warn the user that child lock
is enabled.If you press any button or turn the
Programme Selection knob while the Child Lock
is enabled, the same warning will be displayed.
To disable Child Lock:
Press and hold the Auxiliary Function button 2
for 3 seconds while the programme is running.
While you’re holding the button pressed for 3
seconds, C03, C02 and C01 will be displayed
respectively. Then, “COF” will be displayed to
warn the user that child lock is disabled.
C
INFORMATION
• In addition to the method above, to deactivate
the Child Lock, switch the Programme Selection
knob to On/Off position when no programme is
running, and select another programme.
• Child Lock will not be disabled after a power
failure or unplugging.
•
Ant
If you press and hold the auxiliary function button
3 for 3 seconds, this function will be selected
and the programme follow-up light of the relevant
programme will turn on. When this function is
selected, the drum will rotate for up to eight hours
to ensure that the clothes do not crease at the end
of the programme. At any time during these eight
hours, you can cancel the programme and unload
the machine. Just press any button or turn the
programme selection knob to end the function. The
programme follow-up light will remain on even if you
end the function by pressing any button. If you end
the function by turning the programme selection
knob, the programme follow-up light will remain on
or go off depending on the selected programme.
If you do not cancel the function by pressing the
Auxiliary Function button 3 for 3 seconds, it will be
used in the next washing cycles as well.
4.3.11 End Time Adjustment
The End Time Adjustment function allows you to
set the end time of the programme up to 19 hours.
You can increase this time by 1-hour intervals.
C
INFORMATION
• Please do not use liquid detergent if you
have selected the End Time Adjustment
function. Stains might remain on the clothes.
1. Open the loading door, place the laundry
and add detergent, etc.
2. Select the washing programme,
temperature, spin speed and, if required,
the auxiliary functions.
3. Press the End Time Adjustment button and
select the desired time.